Case Study: Custom Leather Cord for a Baby Product Brand in Israel
Source:Victorian Era Collectibles /
Time:2026-09-18
Leather Cord for a Baby Product Brand in Israel
A Baby Product Brand approached us with a leather cord requirement for the Israel market. The brief was specific: a defined look, a hard launch date and a unit cost that had to survive freight and duty. This case study records what was specified, what went wrong in sampling and how the bulk order was delivered.
The challenge
- Shrinkage that only showed up after the first wash
- A zipper puller that broke under pull test at the warehouse
- An interlining that bubbled after the first press
What we specified
| Item | Leather Cord |
|---|---|
| Client type | A Baby Product Brand |
| Market | Israel |
| Order volume | 10,000 pieces across 3 specifications |
| Base material | ABS Resin |
| Standard size | 6 mm Width |
| Finish | Pearlescent Coating |
| Sampling rounds | 3 |
| Delivery window | 10 weeks from PO to ex-factory |
| Compliance | GB 18401 |
How it was resolved
- We rebuilt the specification around ABS Resin and locked the tolerance before bulk.
- The finish was moved to Antique Brass Plating after strike-off tests showed better durability.
- A pre-production sample was approved and retained as the golden reference.
- Production ran with in-line inspection and a mid-run photo report.
- Cartons were packed to the client's own barcode and ratio specification.
Result
- 10,000 pieces delivered inside the 10-week window.
- Unit cost held within 3.0% of the original quotation.
- Inspection-related rejection stayed under 0.5%.
- The specification is now on file, so reorders reproduce the approved sample.
What we would repeat
Approve a pre-production sample made from the actual bulk base material. Substitute material behaves differently in finishing.
Planning something similar?
If you are comparing suppliers, send us the spec they quoted against. We will quote the same spec and show you where the difference sits.
