Case Study: Custom Magnetic Snap for an Outdoor Gear Label in Sweden
Source:Acrylic Photo Keychains /
Time:2026-09-18
Magnetic Snap for an Outdoor Gear Label in Sweden
An Outdoor Gear Label approached us with a magnetic snap requirement for the Sweden market. The brief was specific: a defined look, a hard launch date and a unit cost that had to survive freight and duty. This case study records what was specified, what went wrong in sampling and how the bulk order was delivered.
The challenge
- Elastic that lost recovery after three washes
- Shade drift between the approved lab dip and the bulk lot
- A spec that lived in an email instead of a tech pack
What we specified
| Item | Magnetic Snap |
|---|---|
| Client type | An Outdoor Gear Label |
| Market | Sweden |
| Order volume | 5,000 pieces across 4 specifications |
| Base material | Wood |
| Standard size | 50 mm Width |
| Finish | Sandblasted Finish |
| Sampling rounds | 3 |
| Delivery window | 10 weeks from PO to ex-factory |
| Compliance | GRS |
How it was resolved
- We rebuilt the specification around Wood and locked the tolerance before bulk.
- The finish was moved to Antique Brass Plating after strike-off tests showed better durability.
- A pre-production sample was approved and retained as the golden reference.
- Production ran with in-line inspection and a mid-run photo report.
- Cartons were packed to the client's own barcode and ratio specification.
Result
- 5,000 pieces delivered inside the 10-week window.
- Unit cost held within 1.5% of the original quotation.
- Inspection-related rejection stayed under 2.0%.
- The specification is now on file, so reorders reproduce the approved sample.
What we would repeat
Lock the material standard before sampling. Once the base changes, every downstream approval has to be redone and the calendar slips.
Planning something similar?
Send the reference sample or tech pack and we will come back with a costed specification, a sampling timetable and the compliance documents your market requires.
