Case Study: Custom Tack Button for a Home Textile Brand in Belgium
Source:Fake Topiary Trees /
Time:2026-09-18
Tack Button for a Home Textile Brand in Belgium
A Home Textile Brand approached us with a tack button requirement for the Belgium market. The brief was specific: a defined look, a hard launch date and a unit cost that had to survive freight and duty. This case study records what was specified, what went wrong in sampling and how the bulk order was delivered.
The challenge
- A trim that passed sampling but failed in-line because it was never cycle tested
- MOQ that was quoted per colourway rather than per style
- A zipper puller that broke under pull test at the warehouse
What we specified
| Item | Tack Button |
|---|---|
| Client type | A Home Textile Brand |
| Market | Belgium |
| Order volume | 50,000 pieces across 6 specifications |
| Base material | Brass |
| Standard size | 6 mm Width |
| Finish | Brushed Silver Finish |
| Sampling rounds | 2 |
| Delivery window | 8 weeks from PO to ex-factory |
| Compliance | BSCI |
How it was resolved
- We rebuilt the specification around Brass and locked the tolerance before bulk.
- The finish was moved to Rainbow Iridescent Finish after strike-off tests showed better durability.
- A pre-production sample was approved and retained as the golden reference.
- Production ran with in-line inspection and a mid-run photo report.
- Cartons were packed to the client's own barcode and ratio specification.
Result
- 50,000 pieces delivered inside the 8-week window.
- Unit cost held within 4.5% of the original quotation.
- Inspection-related rejection stayed under 1.5%.
- The specification is now on file, so reorders reproduce the approved sample.
What we would repeat
Keep one accountable owner on both sides. Most delays come from hand-offs, not from machines.
Planning something similar?
Send the reference sample or tech pack and we will come back with a costed specification, a sampling timetable and the compliance documents your market requires.
