Case Study: Custom Metal Zipper for an Outdoor Gear Label in Czechia
Source:Disney Snow Globes /
Time:2026-09-18
Metal Zipper for an Outdoor Gear Label in Czechia
An Outdoor Gear Label approached us with a metal zipper requirement for the Czechia market. The brief was specific: a defined look, a hard launch date and a unit cost that had to survive freight and duty. This case study records what was specified, what went wrong in sampling and how the bulk order was delivered.
The challenge
- MOQ that was quoted per colourway rather than per style
- Elastic that lost recovery after three washes
- A zipper puller that broke under pull test at the warehouse
What we specified
| Item | Metal Zipper |
|---|---|
| Client type | An Outdoor Gear Label |
| Market | Czechia |
| Order volume | 10,000 pieces across 2 specifications |
| Base material | Glass |
| Standard size | 9 mm Width |
| Finish | Powder Coating |
| Sampling rounds | 2 |
| Delivery window | 8 weeks from PO to ex-factory |
| Compliance | Bluesign |
How it was resolved
- We rebuilt the specification around Glass and locked the tolerance before bulk.
- The finish was moved to Enzyme Wash Finish after strike-off tests showed better durability.
- A pre-production sample was approved and retained as the golden reference.
- Production ran with in-line inspection and a mid-run photo report.
- Cartons were packed to the client's own barcode and ratio specification.
Result
- 10,000 pieces delivered inside the 8-week window.
- Unit cost held within 2.0% of the original quotation.
- Inspection-related rejection stayed under 1.0%.
- The specification is now on file, so reorders reproduce the approved sample.
What we would repeat
Fix the specification count early. Adding variants after production starts is the most expensive change a client can request.
Planning something similar?
If you are comparing suppliers, send us the spec they quoted against. We will quote the same spec and show you where the difference sits.
