Case Study: Custom Boiled Wool Fabric for a Startup Apparel Label in Peru
Source:Aesthetic Resin Craft /
Time:2026-09-18
Boiled Wool Fabric for a Startup Apparel Label in Peru
A Startup Apparel Label approached us with a boiled wool fabric requirement for the Peru market. The brief was specific: a defined look, a hard launch date and a unit cost that had to survive freight and duty. This case study records what was specified, what went wrong in sampling and how the bulk order was delivered.
The challenge
- Shrinkage that only showed up after the first wash
- Cartons packed to the factory ratio instead of the buyer's size ratio
- A spec that lived in an email instead of a tech pack
What we specified
| Item | Boiled Wool Fabric |
|---|---|
| Client type | A Startup Apparel Label |
| Market | Peru |
| Order volume | 5,000 pieces across 2 specifications |
| Base material | Brass |
| Standard size | 360 gsm |
| Finish | Matte Black Coating |
| Sampling rounds | 2 |
| Delivery window | 6 weeks from PO to ex-factory |
| Compliance | GRS |
How it was resolved
- We rebuilt the specification around Brass and locked the tolerance before bulk.
- The finish was moved to Nickel-Free Electroplating after strike-off tests showed better durability.
- A pre-production sample was approved and retained as the golden reference.
- Production ran with in-line inspection and a mid-run photo report.
- Cartons were packed to the client's own barcode and ratio specification.
Result
- 5,000 pieces delivered inside the 6-week window.
- Unit cost held within 3.0% of the original quotation.
- Inspection-related rejection stayed under 2.0%.
- The specification is now on file, so reorders reproduce the approved sample.
What we would repeat
Fix the specification count early. Adding variants after production starts is the most expensive change a client can request.
Planning something similar?
If you are comparing suppliers, send us the spec they quoted against. We will quote the same spec and show you where the difference sits.
