Case Study: Custom Core Spun Thread for an Independent Boutique in New Zealand

Core Spun Thread for an Independent Boutique in New Zealand

An Independent Boutique approached us with a core spun thread requirement for the New Zealand market. The brief was specific: a defined look, a hard launch date and a unit cost that had to survive freight and duty. This case study records what was specified, what went wrong in sampling and how the bulk order was delivered.

The challenge

• A spec that lived in an email instead of a tech pack
• A trim that passed sampling but failed in-line because it was never cycle tested
• Elastic that lost recovery after three washes

What we specified

How it was resolved

1. We rebuilt the specification around Neoprene and locked the tolerance before bulk.
2. The finish was moved to Powder Coating after strike-off tests showed better durability.
3. A pre-production sample was approved and retained as the golden reference.
4. Production ran with in-line inspection and a mid-run photo report.
5. Cartons were packed to the client's own barcode and ratio specification.

Result

• 100,000 pieces delivered inside the 5-week window.
• Unit cost held within 4.5% of the original quotation.
• Inspection-related rejection stayed under 0.5%.
• The specification is now on file, so reorders reproduce the approved sample.

What we would repeat

Fix the specification count early. Adding variants after production starts is the most expensive change a client can request.

Planning something similar?

Send the reference sample or tech pack and we will come back with a costed specification, a sampling timetable and the compliance documents your market requires.