Case Study: Custom Georgette Fabric for a Yacht Interior Studio in India
Source:Metal Cup Trophies /
Time:2026-09-18
Georgette Fabric for a Yacht Interior Studio in India
A Yacht Interior Studio approached us with a georgette fabric requirement for the India market. The brief was specific: a defined look, a hard launch date and a unit cost that had to survive freight and duty. This case study records what was specified, what went wrong in sampling and how the bulk order was delivered.
The challenge
- Elastic that lost recovery after three washes
- Lead time quoted without the plating or dyeing sub-process
- Shade drift between the approved lab dip and the bulk lot
What we specified
| Item | Georgette Fabric |
|---|---|
| Client type | A Yacht Interior Studio |
| Market | India |
| Order volume | 100,000 pieces across 6 specifications |
| Base material | Neoprene |
| Standard size | 210 gsm |
| Finish | Nickel-Free Electroplating |
| Sampling rounds | 2 |
| Delivery window | 6 weeks from PO to ex-factory |
| Compliance | EN 71-3 |
How it was resolved
- We rebuilt the specification around Neoprene and locked the tolerance before bulk.
- The finish was moved to Chrome Plating after strike-off tests showed better durability.
- A pre-production sample was approved and retained as the golden reference.
- Production ran with in-line inspection and a mid-run photo report.
- Cartons were packed to the client's own barcode and ratio specification.
Result
- 100,000 pieces delivered inside the 6-week window.
- Unit cost held within 4.5% of the original quotation.
- Inspection-related rejection stayed under 1.0%.
- The specification is now on file, so reorders reproduce the approved sample.
What we would repeat
Lock the material standard before sampling. Once the base changes, every downstream approval has to be redone and the calendar slips.
Planning something similar?
If you are comparing suppliers, send us the spec they quoted against. We will quote the same spec and show you where the difference sits.
