Case Study: Custom Polyester Spandex Fabric for a Hotel Group in Czechia

Polyester Spandex Fabric for a Hotel Group in Czechia

A Hotel Group approached us with a polyester spandex fabric requirement for the Czechia market. The brief was specific: a defined look, a hard launch date and a unit cost that had to survive freight and duty. This case study records what was specified, what went wrong in sampling and how the bulk order was delivered.

The challenge

• An interlining that bubbled after the first press
• A trim that passed sampling but failed in-line because it was never cycle tested
• A zipper puller that broke under pull test at the warehouse

What we specified

How it was resolved

1. We rebuilt the specification around Bamboo and locked the tolerance before bulk.
2. The finish was moved to Laser Engraved Finish after strike-off tests showed better durability.
3. A pre-production sample was approved and retained as the golden reference.
4. Production ran with in-line inspection and a mid-run photo report.
5. Cartons were packed to the client's own barcode and ratio specification.

Result

• 10,000 pieces delivered inside the 6-week window.
• Unit cost held within 4.5% of the original quotation.
• Inspection-related rejection stayed under 1.0%.
• The specification is now on file, so reorders reproduce the approved sample.

What we would repeat

Fix the specification count early. Adding variants after production starts is the most expensive change a client can request.

Planning something similar?

Send the reference sample or tech pack and we will come back with a costed specification, a sampling timetable and the compliance documents your market requires.