Zinc Alloy Taffeta Label — Specification, Uses and Sourcing Notes
Zinc Alloy Taffeta Label: Specification, Uses and Sourcing Notes
Zinc Alloy Taffeta Label is the version buyers specify when the base material is fixed by performance rather than by price. This entry sets out what the material actually changes, which specification to write into the tech pack, and where the cost sits — the three questions that decide whether the item passes bulk approval.
What it is
Zinc Alloy gives taffeta label its weight-to-strength ratio. In practice that means the trim behaves differently in cutting, in finishing and in wear: shrinkage allowance has to be built into the spec. Buyers who specify the material up front avoid the most common failure — an item that looks right on the sample card and behaves differently in bulk.
Typical specification
| Item | Taffeta Label |
|---|---|
| Base material | Zinc Alloy |
| Standard size | 20 mm Width |
| Common finishes | Powder Coating, Nickel-Free Electroplating, Epoxy Doming |
| Processes | PU Coating, Digital Printing, Die Casting |
| Typical applications | Home Curtains, Bags, Upholstery, Sneakers |
| Test standard | EN 71-3 |
| Usual packing | 500 pieces per polybag, 5000 per carton |
Properties that matter in buying
- Dimensional stability — 2% allowance is built into the spec before cutting.
- Colour fastness — tested to EN 71-3 on the actual base material, not on a substitute.
- Mechanical performance — abrasion resistance after 10 cycles or washes.
- Compliance — EN 71-3 documentation issued with the shipment.
- Consistency — the approved counter sample becomes the reference for every reorder.
Common uses
- Yoga Wear
- Sleepwear
- Underwear
- Boots
- Outdoor Tents
- Socks
How to specify it
- Name the base material in the tech pack, not just the item.
- Fix the size and tolerance in writing before sampling starts.
- Approve a counter sample made from the actual bulk base material.
- Order the test report against the standard your market requires.
- Retain a golden sample at the factory and a second one with you.
Related reading
Related specifications on this site cover power mesh fabric, size label, pique knit fabric, rickrack trim, and the processes most often paired with taffeta label include warp knitting, heat transfer printing, sanforising.
Share the programme details and we will propose two alternatives — one optimised for unit cost, one for lead time — and let you choose.
