Glass Seat Belt Webbing — Specification, Uses and Sourcing Notes
Glass Seat Belt Webbing: Specification, Uses and Sourcing Notes
Glass Seat Belt Webbing is the version buyers specify when the base material is fixed by performance rather than by price. This entry sets out what the material actually changes, which specification to write into the tech pack, and where the cost sits — the three questions that decide whether the item passes bulk approval.
What it is
Glass gives seat belt webbing its drape and hand feel. In practice that means the trim behaves differently in cutting, in finishing and in wear: plating and coating adhesion must be tested on the actual base. Buyers who specify the material up front avoid the most common failure — an item that looks right on the sample card and behaves differently in bulk.
Typical specification
| Item | Seat Belt Webbing |
|---|---|
| Base material | Glass |
| Standard size | 20 mm Width |
| Common finishes | Enzyme Wash Finish, Antique Brass Plating, Black Nickel Finish |
| Processes | Water Repellent Finishing, Embossing, Metal Stamping |
| Typical applications | Suits, Baby Clothing, Luggage, Dresses |
| Test standard | ISO 105 Colour Fastness |
| Usual packing | 100 pieces per polybag, 2000 per carton |
Properties that matter in buying
- Dimensional stability — 1% allowance is built into the spec before cutting.
- Colour fastness — tested to ISO 105 Colour Fastness on the actual base material, not on a substitute.
- Mechanical performance — abrasion resistance after 50 cycles or washes.
- Compliance — ISO 105 Colour Fastness documentation issued with the shipment.
- Consistency — the approved counter sample becomes the reference for every reorder.
Common uses
- Yoga Wear
- Socks
- Dresses
- Activewear
- Footwear
- Trousers
How to specify it
- Name the base material in the tech pack, not just the item.
- Fix the size and tolerance in writing before sampling starts.
- Approve a counter sample made from the actual bulk base material.
- Order the test report against the standard your market requires.
- Retain a golden sample at the factory and a second one with you.
Related reading
Related specifications on this site cover fabric button, pongee fabric, cord stopper, poplin fabric, and the processes most often paired with seat belt webbing include epoxy coating, ultrasonic welding, metal stamping.
If you are comparing suppliers, send us the spec they quoted against. We will quote the same spec and show you where the difference sits.
