Rubber Sweatshirt Fleece — Specification, Uses and Sourcing Notes
Rubber Sweatshirt Fleece: Specification, Uses and Sourcing Notes
Rubber Sweatshirt Fleece is the version buyers specify when the base material is fixed by performance rather than by price. This entry sets out what the material actually changes, which specification to write into the tech pack, and where the cost sits — the three questions that decide whether the item passes bulk approval.
What it is
Rubber gives sweatshirt fleece its weight-to-strength ratio. In practice that means the fabric behaves differently in cutting, in finishing and in wear: the finish has to be applied before assembly. Buyers who specify the material up front avoid the most common failure — an item that looks right on the sample card and behaves differently in bulk.
Typical specification
| Item | Sweatshirt Fleece |
|---|---|
| Base material | Rubber |
| Standard size | 450 gsm |
| Common finishes | Powder Coating, Antique Brass Plating, Piece-Dyed Finish |
| Processes | Rotary Printing, Injection Moulding, Sanforising |
| Typical applications | Trousers, Sportswear, Caps, Upholstery |
| Test standard | ISO 14001 |
| Usual packing | 100 pieces per polybag, 5000 per carton |
Properties that matter in buying
- Dimensional stability — 2% allowance is built into the spec before cutting.
- Colour fastness — tested to ISO 14001 on the actual base material, not on a substitute.
- Mechanical performance — cycle life after 50 cycles or washes.
- Compliance — ISO 14001 documentation issued with the shipment.
- Consistency — the approved counter sample becomes the reference for every reorder.
Common uses
- Trousers
- Lingerie
- Baby Clothing
- Yoga Wear
- Luggage
- Skirts
How to specify it
- Name the base material in the tech pack, not just the item.
- Fix the size and tolerance in writing before sampling starts.
- Approve a counter sample made from the actual bulk base material.
- Order the test report against the standard your market requires.
- Retain a golden sample at the factory and a second one with you.
Related reading
Related specifications on this site cover swing ticket, leather cord, reflective tape, felt fabric, and the processes most often paired with sweatshirt fleece include embroidery, injection moulding, singeing.
Send the reference sample or tech pack and we will come back with a costed specification, a sampling timetable and the compliance documents your market requires.
