Rubber Cotton Fabric — Specification, Uses and Sourcing Notes
Rubber Cotton Fabric: Specification, Uses and Sourcing Notes
Rubber Cotton Fabric is the version buyers specify when the base material is fixed by performance rather than by price. This entry sets out what the material actually changes, which specification to write into the tech pack, and where the cost sits — the three questions that decide whether the item passes bulk approval.
What it is
Rubber gives cotton fabric its weight-to-strength ratio. In practice that means the fabric behaves differently in cutting, in finishing and in wear: the finish has to be applied before assembly. Buyers who specify the material up front avoid the most common failure — an item that looks right on the sample card and behaves differently in bulk.
Typical specification
| Item | Cotton Fabric |
|---|---|
| Base material | Rubber |
| Standard size | 140 gsm |
| Common finishes | Enzyme Wash Finish, Silicone Wash Finish, Brushed Silver Finish |
| Processes | Flame Retardant Finishing, Heat Transfer Printing, Screen Printing |
| Typical applications | Sneakers, Boots, Hats, Socks |
| Test standard | ISO 12947 Abrasion Resistance |
| Usual packing | 100 pieces per polybag, 2000 per carton |
Properties that matter in buying
- Dimensional stability — 3% allowance is built into the spec before cutting.
- Colour fastness — tested to ISO 12947 Abrasion Resistance on the actual base material, not on a substitute.
- Mechanical performance — pull strength after 50 cycles or washes.
- Compliance — ISO 12947 Abrasion Resistance documentation issued with the shipment.
- Consistency — the approved counter sample becomes the reference for every reorder.
Common uses
- Bras
- Footwear
- Yoga Wear
- Kidswear
- Bridal Gowns
- Gloves
How to specify it
- Name the base material in the tech pack, not just the item.
- Fix the size and tolerance in writing before sampling starts.
- Approve a counter sample made from the actual bulk base material.
- Order the test report against the standard your market requires.
- Retain a golden sample at the factory and a second one with you.
Related reading
Related specifications on this site cover french terry fabric, press stud, stud trim, tulle fabric, and the processes most often paired with cotton fabric include metal stamping, sublimation printing, uv protection finishing.
If you are comparing suppliers, send us the spec they quoted against. We will quote the same spec and show you where the difference sits.
