Zipper Tape Sourcing Program for Promotional Product Distributors: Scarves

Zipper Tape Programme for Promotional Product Distributors: Scarves

This programme covers the full path from a zipper tape requirement to a repeatable bulk supply for promotional product distributors. Instead of buying whatever a catalogue happens to stock, you specify the base material, the 9 mm Width, the finish and the packing, and we hold that specification so every reorder matches the last one. It is built around scarves, which is where most of the specification detail sits.

The most common failure in zipper tape sourcing is not price — it is drift. A base material changes mill, the shade moves, a plating bath changes and the item quietly stops matching the approved sample. We prevent that with a written spec, an approved counter sample and a golden sample retained at the factory.

What the programme covers

• Specification build from your tech pack or a physical reference sample
• Base material and finish options with costed alternatives
• Sampling, testing and approval against CPSIA
• Bulk production with in-line inspection and photo reporting
• Packing, documentation and shipment under the agreed Incoterm

Recommended specifications

• Iron — used when strength and abrasion resistance come first
• ABS Resin — best balance of cost, availability and test performance
• Nickel Silver — chosen when the item has to survive repeated laundering
• Polyester — selected for colour depth and finish stability

Programme parameters

Why buyers choose this route

• Compliance documentation issued with the shipment, not after it
• One accountable owner from sampling through to ex-factory
• Golden sample retained at the factory and a second one held by the buyer
• Costed alternatives shown at quotation so the trade-off is visible
• Trim and fabric sourced from audited mills with test reports on file

How the programme runs

1. Discovery call: quantity, target price, delivery window and compliance needs
2. Material and finish proposal with costed alternatives
3. Counter sample built from your tech pack or reference sample
4. Approval, testing and pre-production sign-off
5. Bulk production with in-line inspection and photo reporting
6. Packing, documentation and shipment under the agreed Incoterm

FAQ

How long does sampling take?

10 working days for the first sample, with 5 days per revision round. Plated or dyed-to-match items add a few days.

Can you match a physical sample?

Yes. Send the reference and we reverse engineer the specification, then produce a counter sample for approval before any bulk commitment.

What are the payment and delivery terms?

Standard terms are a deposit with the order and the balance before shipment, under EXW / FOB / CIF / DDP as agreed.

What happens if a bulk lot fails inspection?

The lot is reworked or remade at our cost. Inspection reports are shared before the balance payment is due.

If you are comparing suppliers, send us the spec they quoted against. We will quote the same spec and show you where the difference sits.