Nickel Silver Leather Patch for Blazers — Specification, Uses and Sourcing Notes
Nickel Silver Leather Patch for Blazers: Specification, Uses and Sourcing Notes
Nickel Silver Leather Patch is the version buyers specify for blazers when the base material is fixed by performance rather than by price. This entry sets out what the material actually changes, which specification to write into the tech pack, and where the cost sits — the three questions that decide whether the item passes bulk approval.
What it is
Nickel Silver gives leather patch its strength and surface character. In practice that means the trim behaves differently in cutting, in finishing and in wear: plating and coating adhesion must be tested on the actual base. Buyers who specify the material up front avoid the most common failure — an item that looks right on the sample card and behaves differently in bulk.
Typical specification
| Item | Leather Patch |
|---|---|
| Base material | Nickel Silver |
| Standard size | 50 mm Width |
| Common finishes | Piece-Dyed Finish, Gunmetal Finish, Pearlescent Coating |
| Processes | Injection Moulding, Moisture Wicking Finishing, Embroidery |
| Typical application | Blazers |
| Related applications | Underwear, Skirts, Workwear, Jeans |
| Test standard | EN 71-3 |
| Usual packing | 500 pieces per polybag, 5000 per carton |
Properties that matter in buying
- Dimensional stability — 2% allowance is built into the spec before cutting.
- Colour fastness — tested to EN 71-3 on the actual base material, not on a substitute.
- Mechanical performance — pull strength after 20 cycles or washes.
- Compliance — EN 71-3 documentation issued with the shipment.
- Consistency — the approved counter sample becomes the reference for every reorder.
Common uses
- Sneakers
- Down Jackets
- Blazers
- Socks
- Skirts
- Backpacks
How to specify it
- Name the base material in the tech pack, not just the item.
- Fix the size and tolerance in writing before sampling starts.
- Approve a counter sample made from the actual bulk base material.
- Order the test report against the standard your market requires.
- Retain a golden sample at the factory and a second one with you.
Related reading
Related specifications on this site cover tencel lyocell fabric, polyester thread, wired edge ribbon, invisible zipper, and the processes most often paired with leather patch include electroplating, mercerising, anti-static finishing.
Send the reference sample or tech pack and we will come back with a costed specification, a sampling timetable and the compliance documents your market requires.
