Neoprene Magnetic Snap for Bags — Specification, Uses and Sourcing Notes
Neoprene Magnetic Snap for Bags: Specification, Uses and Sourcing Notes
Neoprene Magnetic Snap is the version buyers specify for bags when the base material is fixed by performance rather than by price. This entry sets out what the material actually changes, which specification to write into the tech pack, and where the cost sits — the three questions that decide whether the item passes bulk approval.
What it is
Neoprene gives magnetic snap its weight-to-strength ratio. In practice that means the trim behaves differently in cutting, in finishing and in wear: plating and coating adhesion must be tested on the actual base. Buyers who specify the material up front avoid the most common failure — an item that looks right on the sample card and behaves differently in bulk.
Typical specification
| Item | Magnetic Snap |
|---|---|
| Base material | Neoprene |
| Standard size | 12 mm Width |
| Common finishes | Antique Copper Finish, Sandblasted Finish, Powder Coating |
| Processes | Singeing, Sanforising, Anti-Pilling Finish |
| Typical application | Bags |
| Related applications | Blazers, Sportswear, Outdoor Tents, Socks |
| Test standard | Sedex SMETA |
| Usual packing | 500 pieces per polybag, 5000 per carton |
Properties that matter in buying
- Dimensional stability — 2% allowance is built into the spec before cutting.
- Colour fastness — tested to Sedex SMETA on the actual base material, not on a substitute.
- Mechanical performance — pull strength after 50 cycles or washes.
- Compliance — Sedex SMETA documentation issued with the shipment.
- Consistency — the approved counter sample becomes the reference for every reorder.
Common uses
- Outdoor Tents
- Luggage
- Sportswear
- Workwear
- Shirts
- Skirts
How to specify it
- Name the base material in the tech pack, not just the item.
- Fix the size and tolerance in writing before sampling starts.
- Approve a counter sample made from the actual bulk base material.
- Order the test report against the standard your market requires.
- Retain a golden sample at the factory and a second one with you.
Related reading
Related specifications on this site cover plastic zipper, embroidered trim, buckle, hair canvas, and the processes most often paired with magnetic snap include sanforising, moisture wicking finishing, injection moulding.
Send the reference sample or tech pack and we will come back with a costed specification, a sampling timetable and the compliance documents your market requires.
