Rubber Open-End Zipper for Caps — Specification, Uses and Sourcing Notes
Rubber Open-End Zipper for Caps: Specification, Uses and Sourcing Notes
Rubber Open-End Zipper is the version buyers specify for caps when the base material is fixed by performance rather than by price. This entry sets out what the material actually changes, which specification to write into the tech pack, and where the cost sits — the three questions that decide whether the item passes bulk approval.
What it is
Rubber gives open-end zipper its drape and hand feel. In practice that means the trim behaves differently in cutting, in finishing and in wear: plating and coating adhesion must be tested on the actual base. Buyers who specify the material up front avoid the most common failure — an item that looks right on the sample card and behaves differently in bulk.
Typical specification
| Item | Open-End Zipper |
|---|---|
| Base material | Rubber |
| Standard size | 50 mm Width |
| Common finishes | Black Nickel Finish, Powder Coating, Gunmetal Finish |
| Processes | Mercerising, Ultrasonic Welding, Embroidery |
| Typical application | Caps |
| Related applications | Trousers, Shirts, Bras, Lingerie |
| Test standard | JIS L Standards |
| Usual packing | 200 pieces per polybag, 2000 per carton |
Properties that matter in buying
- Dimensional stability — 3% allowance is built into the spec before cutting.
- Colour fastness — tested to JIS L Standards on the actual base material, not on a substitute.
- Mechanical performance — elastic recovery after 20 cycles or washes.
- Compliance — JIS L Standards documentation issued with the shipment.
- Consistency — the approved counter sample becomes the reference for every reorder.
Common uses
- Bridal Gowns
- Kidswear
- Dresses
- Caps
- Upholstery
- Footwear
How to specify it
- Name the base material in the tech pack, not just the item.
- Fix the size and tolerance in writing before sampling starts.
- Approve a counter sample made from the actual bulk base material.
- Order the test report against the standard your market requires.
- Retain a golden sample at the factory and a second one with you.
Related reading
Related specifications on this site cover metallic thread, heat transfer vinyl, scuba knit fabric, cotton thread, and the processes most often paired with open-end zipper include bonding, electroplating, flame retardant finishing.
Send the reference sample or tech pack and we will come back with a costed specification, a sampling timetable and the compliance documents your market requires.
