Zinc Alloy Jacquard Ribbon for Coats — Specification, Uses and Sourcing Notes
Zinc Alloy Jacquard Ribbon for Coats: Specification, Uses and Sourcing Notes
Zinc Alloy Jacquard Ribbon is the version buyers specify for coats when the base material is fixed by performance rather than by price. This entry sets out what the material actually changes, which specification to write into the tech pack, and where the cost sits — the three questions that decide whether the item passes bulk approval.
What it is
Zinc Alloy gives jacquard ribbon its weight-to-strength ratio. In practice that means the trim behaves differently in cutting, in finishing and in wear: shrinkage allowance has to be built into the spec. Buyers who specify the material up front avoid the most common failure — an item that looks right on the sample card and behaves differently in bulk.
Typical specification
| Item | Jacquard Ribbon |
|---|---|
| Base material | Zinc Alloy |
| Standard size | 15 mm Width |
| Common finishes | Enzyme Wash Finish, Silicone Wash Finish, Chrome Plating |
| Processes | Singeing, Die Casting, Moisture Wicking Finishing |
| Typical application | Coats |
| Related applications | Backpacks, Hats, Workwear, Lingerie |
| Test standard | RoHS |
| Usual packing | 100 pieces per polybag, 5000 per carton |
Properties that matter in buying
- Dimensional stability — 1% allowance is built into the spec before cutting.
- Colour fastness — tested to RoHS on the actual base material, not on a substitute.
- Mechanical performance — pull strength after 20 cycles or washes.
- Compliance — RoHS documentation issued with the shipment.
- Consistency — the approved counter sample becomes the reference for every reorder.
Common uses
- Upholstery
- Skirts
- Sportswear
- Bras
- Swimwear
- Blazers
How to specify it
- Name the base material in the tech pack, not just the item.
- Fix the size and tolerance in writing before sampling starts.
- Approve a counter sample made from the actual bulk base material.
- Order the test report against the standard your market requires.
- Retain a golden sample at the factory and a second one with you.
Related reading
Related specifications on this site cover metal button, flame retardant fabric, rubber patch, bias binding tape, and the processes most often paired with jacquard ribbon include flame retardant finishing, ultrasonic welding, piece dyeing.
Send the reference sample or tech pack and we will come back with a costed specification, a sampling timetable and the compliance documents your market requires.
