Polyester Bullion Patch for Coats — Specification, Uses and Sourcing Notes
Polyester Bullion Patch for Coats: Specification, Uses and Sourcing Notes
Polyester Bullion Patch is the version buyers specify for coats when the base material is fixed by performance rather than by price. This entry sets out what the material actually changes, which specification to write into the tech pack, and where the cost sits — the three questions that decide whether the item passes bulk approval.
What it is
Polyester gives bullion patch its durability under wash and abrasion. In practice that means the trim behaves differently in cutting, in finishing and in wear: tighter tolerance is needed on the finished dimension. Buyers who specify the material up front avoid the most common failure — an item that looks right on the sample card and behaves differently in bulk.
Typical specification
| Item | Bullion Patch |
|---|---|
| Base material | Polyester |
| Standard size | 6 mm Width |
| Common finishes | Silicone Wash Finish, Laser Engraved Finish, Anodised Finish |
| Processes | Embroidery, Heat Transfer Printing, Yarn Dyeing |
| Typical application | Coats |
| Related applications | Down Jackets, Baby Clothing, Boots, Sleepwear |
| Test standard | EN 71-3 |
| Usual packing | 500 pieces per polybag, 2000 per carton |
Properties that matter in buying
- Dimensional stability — 2% allowance is built into the spec before cutting.
- Colour fastness — tested to EN 71-3 on the actual base material, not on a substitute.
- Mechanical performance — abrasion resistance after 30 cycles or washes.
- Compliance — EN 71-3 documentation issued with the shipment.
- Consistency — the approved counter sample becomes the reference for every reorder.
Common uses
- Sleepwear
- Bras
- Skirts
- Yoga Wear
- Dresses
- Gloves
How to specify it
- Name the base material in the tech pack, not just the item.
- Fix the size and tolerance in writing before sampling starts.
- Approve a counter sample made from the actual bulk base material.
- Order the test report against the standard your market requires.
- Retain a golden sample at the factory and a second one with you.
Related reading
Related specifications on this site cover feather trim, grosgrain ribbon, velour fabric, mulberry silk fabric, and the processes most often paired with bullion patch include piece dyeing, anti-static finishing, mercerising.
Send the reference sample or tech pack and we will come back with a costed specification, a sampling timetable and the compliance documents your market requires.
