Glass Horn Button for Swimwear — Specification, Uses and Sourcing Notes
Glass Horn Button for Swimwear: Specification, Uses and Sourcing Notes
Glass Horn Button is the version buyers specify for swimwear when the base material is fixed by performance rather than by price. This entry sets out what the material actually changes, which specification to write into the tech pack, and where the cost sits — the three questions that decide whether the item passes bulk approval.
What it is
Glass gives horn button its durability under wash and abrasion. In practice that means the trim behaves differently in cutting, in finishing and in wear: tighter tolerance is needed on the finished dimension. Buyers who specify the material up front avoid the most common failure — an item that looks right on the sample card and behaves differently in bulk.
Typical specification
| Item | Horn Button |
|---|---|
| Base material | Glass |
| Standard size | 12 mm Width |
| Common finishes | Rose Gold Plating, UV Printing, Laser Engraved Finish |
| Processes | Bonding, Anodising, Yarn Dyeing |
| Typical application | Swimwear |
| Related applications | Jeans, Bridal Gowns, Socks, Home Curtains |
| Test standard | GRS |
| Usual packing | 200 pieces per polybag, 5000 per carton |
Properties that matter in buying
- Dimensional stability — 2% allowance is built into the spec before cutting.
- Colour fastness — tested to GRS on the actual base material, not on a substitute.
- Mechanical performance — pull strength after 50 cycles or washes.
- Compliance — GRS documentation issued with the shipment.
- Consistency — the approved counter sample becomes the reference for every reorder.
Common uses
- Bags
- Caps
- Underwear
- Activewear
- Boots
- Scarves
How to specify it
- Name the base material in the tech pack, not just the item.
- Fix the size and tolerance in writing before sampling starts.
- Approve a counter sample made from the actual bulk base material.
- Order the test report against the standard your market requires.
- Retain a golden sample at the factory and a second one with you.
Related reading
Related specifications on this site cover georgette fabric, tpu laminated fabric, braided elastic, sequin trim, and the processes most often paired with horn button include injection moulding, anti-bacterial finishing, water repellent finishing.
Send the reference sample or tech pack and we will come back with a costed specification, a sampling timetable and the compliance documents your market requires.
