Brass Bra Ring and Slider for Workwear — Specification, Uses and Sourcing Notes
Brass Bra Ring and Slider for Workwear: Specification, Uses and Sourcing Notes
Brass Bra Ring and Slider is the version buyers specify for workwear when the base material is fixed by performance rather than by price. This entry sets out what the material actually changes, which specification to write into the tech pack, and where the cost sits — the three questions that decide whether the item passes bulk approval.
What it is
Brass gives bra ring and slider its drape and hand feel. In practice that means the trim behaves differently in cutting, in finishing and in wear: plating and coating adhesion must be tested on the actual base. Buyers who specify the material up front avoid the most common failure — an item that looks right on the sample card and behaves differently in bulk.
Typical specification
| Item | Bra Ring and Slider |
|---|---|
| Base material | Brass |
| Standard size | 8# Gauge |
| Common finishes | Soft-Touch Rubber Coating, Mercerised Finish, Silicone Wash Finish |
| Processes | Embroidery, Screen Printing, Epoxy Coating |
| Typical application | Workwear |
| Related applications | Activewear, Blouses, Baby Clothing, Sportswear |
| Test standard | GRS |
| Usual packing | 200 pieces per polybag, 2000 per carton |
Properties that matter in buying
- Dimensional stability — 3% allowance is built into the spec before cutting.
- Colour fastness — tested to GRS on the actual base material, not on a substitute.
- Mechanical performance — cycle life after 10 cycles or washes.
- Compliance — GRS documentation issued with the shipment.
- Consistency — the approved counter sample becomes the reference for every reorder.
Common uses
- Footwear
- Coats
- Backpacks
- Sneakers
- Skirts
- Bags
How to specify it
- Name the base material in the tech pack, not just the item.
- Fix the size and tolerance in writing before sampling starts.
- Approve a counter sample made from the actual bulk base material.
- Order the test report against the standard your market requires.
- Retain a golden sample at the factory and a second one with you.
Related reading
Related specifications on this site cover lobster clasp, tack button, polyester thread, reflective tape, and the processes most often paired with bra ring and slider include flame retardant finishing, anti-static finishing, ultrasonic welding.
If you are comparing suppliers, send us the spec they quoted against. We will quote the same spec and show you where the difference sits.
