Wood Tack Button for Swimwear — Specification, Uses and Sourcing Notes
Wood Tack Button for Swimwear: Specification, Uses and Sourcing Notes
Wood Tack Button is the version buyers specify for swimwear when the base material is fixed by performance rather than by price. This entry sets out what the material actually changes, which specification to write into the tech pack, and where the cost sits — the three questions that decide whether the item passes bulk approval.
What it is
Wood gives tack button its durability under wash and abrasion. In practice that means the trim behaves differently in cutting, in finishing and in wear: shrinkage allowance has to be built into the spec. Buyers who specify the material up front avoid the most common failure — an item that looks right on the sample card and behaves differently in bulk.
Typical specification
| Item | Tack Button |
|---|---|
| Base material | Wood |
| Standard size | 5# Gauge |
| Common finishes | Rainbow Iridescent Finish, Soft-Touch Rubber Coating, Antique Brass Plating |
| Processes | Screen Printing, Metal Stamping, Anti-Pilling Finish |
| Typical application | Swimwear |
| Related applications | Coats, Trousers, Blouses, Backpacks |
| Test standard | BSCI |
| Usual packing | 500 pieces per polybag, 5000 per carton |
Properties that matter in buying
- Dimensional stability — 3% allowance is built into the spec before cutting.
- Colour fastness — tested to BSCI on the actual base material, not on a substitute.
- Mechanical performance — pull strength after 10 cycles or washes.
- Compliance — BSCI documentation issued with the shipment.
- Consistency — the approved counter sample becomes the reference for every reorder.
Common uses
- Sleepwear
- Yoga Wear
- Upholstery
- Down Jackets
- Dresses
- Outdoor Tents
How to specify it
- Name the base material in the tech pack, not just the item.
- Fix the size and tolerance in writing before sampling starts.
- Approve a counter sample made from the actual bulk base material.
- Order the test report against the standard your market requires.
- Retain a golden sample at the factory and a second one with you.
Related reading
Related specifications on this site cover taffeta fabric, cotton label, printed label, anti-slip tape, and the processes most often paired with tack button include pu coating, brushing, piece dyeing.
If you are comparing suppliers, send us the spec they quoted against. We will quote the same spec and show you where the difference sits.
