Brass Coated Fabric for Outdoor Tents — Specification, Uses and Sourcing Notes
Brass Coated Fabric for Outdoor Tents: Specification, Uses and Sourcing Notes
Brass Coated Fabric is the version buyers specify for outdoor tents when the base material is fixed by performance rather than by price. This entry sets out what the material actually changes, which specification to write into the tech pack, and where the cost sits — the three questions that decide whether the item passes bulk approval.
What it is
Brass gives coated fabric its weight-to-strength ratio. In practice that means the fabric behaves differently in cutting, in finishing and in wear: plating and coating adhesion must be tested on the actual base. Buyers who specify the material up front avoid the most common failure — an item that looks right on the sample card and behaves differently in bulk.
Typical specification
| Item | Coated Fabric |
|---|---|
| Base material | Brass |
| Standard size | 360 gsm |
| Common finishes | Sandblasted Finish, Glossy Enamel Coating, Laser Engraved Finish |
| Processes | Anodising, Ultrasonic Welding, Piece Dyeing |
| Typical application | Outdoor Tents |
| Related applications | Swimwear, Boots, Coats, Activewear |
| Test standard | ISO 105 Colour Fastness |
| Usual packing | 100 pieces per polybag, 2000 per carton |
Properties that matter in buying
- Dimensional stability — 3% allowance is built into the spec before cutting.
- Colour fastness — tested to ISO 105 Colour Fastness on the actual base material, not on a substitute.
- Mechanical performance — cycle life after 50 cycles or washes.
- Compliance — ISO 105 Colour Fastness documentation issued with the shipment.
- Consistency — the approved counter sample becomes the reference for every reorder.
Common uses
- Caps
- Lingerie
- Luggage
- Boots
- Coats
- Gloves
How to specify it
- Name the base material in the tech pack, not just the item.
- Fix the size and tolerance in writing before sampling starts.
- Approve a counter sample made from the actual bulk base material.
- Order the test report against the standard your market requires.
- Retain a golden sample at the factory and a second one with you.
Related reading
Related specifications on this site cover faux leather fabric, stud trim, twill fabric, seam tape, and the processes most often paired with coated fabric include heat transfer printing, sublimation printing, metal stamping.
Tell us the item, the quantity and the delivery window. We will quote it with the sub-processes named, so the lead time you approve is the lead time you get.
