PU Leather Magnetic Snap for Caps — Specification, Uses and Sourcing Notes
PU Leather Magnetic Snap for Caps: Specification, Uses and Sourcing Notes
PU Leather Magnetic Snap is the version buyers specify for caps when the base material is fixed by performance rather than by price. This entry sets out what the material actually changes, which specification to write into the tech pack, and where the cost sits — the three questions that decide whether the item passes bulk approval.
What it is
PU Leather gives magnetic snap its weight-to-strength ratio. In practice that means the trim behaves differently in cutting, in finishing and in wear: tighter tolerance is needed on the finished dimension. Buyers who specify the material up front avoid the most common failure — an item that looks right on the sample card and behaves differently in bulk.
Typical specification
| Item | Magnetic Snap |
|---|---|
| Base material | PU Leather |
| Standard size | 8# Gauge |
| Common finishes | Matte Black Coating, Epoxy Doming, Brushed Silver Finish |
| Processes | Stone Washing, Metal Stamping, Sanforising |
| Typical application | Caps |
| Related applications | Jeans, Shirts, Bags, Dresses |
| Test standard | ISO 105 Colour Fastness |
| Usual packing | 100 pieces per polybag, 10000 per carton |
Properties that matter in buying
- Dimensional stability — 3% allowance is built into the spec before cutting.
- Colour fastness — tested to ISO 105 Colour Fastness on the actual base material, not on a substitute.
- Mechanical performance — pull strength after 20 cycles or washes.
- Compliance — ISO 105 Colour Fastness documentation issued with the shipment.
- Consistency — the approved counter sample becomes the reference for every reorder.
Common uses
- Sneakers
- Down Jackets
- Sleepwear
- Uniforms
- Sportswear
- Backpacks
How to specify it
- Name the base material in the tech pack, not just the item.
- Fix the size and tolerance in writing before sampling starts.
- Approve a counter sample made from the actual bulk base material.
- Order the test report against the standard your market requires.
- Retain a golden sample at the factory and a second one with you.
Related reading
Related specifications on this site cover cupro fabric, heat transfer vinyl, hair canvas, taslan fabric, and the processes most often paired with magnetic snap include anti-static finishing, piece dyeing, anodising.
If you are comparing suppliers, send us the spec they quoted against. We will quote the same spec and show you where the difference sits.
