ABS Resin Taffeta Label for Uniforms — Specification, Uses and Sourcing Notes
ABS Resin Taffeta Label for Uniforms: Specification, Uses and Sourcing Notes
ABS Resin Taffeta Label is the version buyers specify for uniforms when the base material is fixed by performance rather than by price. This entry sets out what the material actually changes, which specification to write into the tech pack, and where the cost sits — the three questions that decide whether the item passes bulk approval.
What it is
ABS Resin gives taffeta label its strength and surface character. In practice that means the trim behaves differently in cutting, in finishing and in wear: shrinkage allowance has to be built into the spec. Buyers who specify the material up front avoid the most common failure — an item that looks right on the sample card and behaves differently in bulk.
Typical specification
| Item | Taffeta Label |
|---|---|
| Base material | ABS Resin |
| Standard size | 32 mm Width |
| Common finishes | Pearlescent Coating, Glossy Enamel Coating, Yarn-Dyed Finish |
| Processes | Injection Moulding, Epoxy Coating, Flame Retardant Finishing |
| Typical application | Uniforms |
| Related applications | Baby Clothing, Bedding Sets, Sleepwear, Sneakers |
| Test standard | ISO 9001 |
| Usual packing | 500 pieces per polybag, 5000 per carton |
Properties that matter in buying
- Dimensional stability — 3% allowance is built into the spec before cutting.
- Colour fastness — tested to ISO 9001 on the actual base material, not on a substitute.
- Mechanical performance — cycle life after 30 cycles or washes.
- Compliance — ISO 9001 documentation issued with the shipment.
- Consistency — the approved counter sample becomes the reference for every reorder.
Common uses
- Hats
- Suits
- Bags
- Kidswear
- Bridal Gowns
- Scarves
How to specify it
- Name the base material in the tech pack, not just the item.
- Fix the size and tolerance in writing before sampling starts.
- Approve a counter sample made from the actual bulk base material.
- Order the test report against the standard your market requires.
- Retain a golden sample at the factory and a second one with you.
Related reading
Related specifications on this site cover side release buckle, chain trim, denim fabric, jacquard webbing, and the processes most often paired with taffeta label include pu coating, flame retardant finishing, moisture wicking finishing.
Send the reference sample or tech pack and we will come back with a costed specification, a sampling timetable and the compliance documents your market requires.
