Cotton Cord Stopper for Coats — Specification, Uses and Sourcing Notes
Cotton Cord Stopper for Coats: Specification, Uses and Sourcing Notes
Cotton Cord Stopper is the version buyers specify for coats when the base material is fixed by performance rather than by price. This entry sets out what the material actually changes, which specification to write into the tech pack, and where the cost sits — the three questions that decide whether the item passes bulk approval.
What it is
Cotton gives cord stopper its drape and hand feel. In practice that means the trim behaves differently in cutting, in finishing and in wear: plating and coating adhesion must be tested on the actual base. Buyers who specify the material up front avoid the most common failure — an item that looks right on the sample card and behaves differently in bulk.
Typical specification
| Item | Cord Stopper |
|---|---|
| Base material | Cotton |
| Standard size | 15 mm Width |
| Common finishes | Piece-Dyed Finish, Glossy Enamel Coating, Anodised Finish |
| Processes | Warp Knitting, Heat Transfer Printing, Electroplating |
| Typical application | Coats |
| Related applications | Boots, Skirts, Blazers, Gloves |
| Test standard | RoHS |
| Usual packing | 500 pieces per polybag, 2000 per carton |
Properties that matter in buying
- Dimensional stability — 3% allowance is built into the spec before cutting.
- Colour fastness — tested to RoHS on the actual base material, not on a substitute.
- Mechanical performance — abrasion resistance after 20 cycles or washes.
- Compliance — RoHS documentation issued with the shipment.
- Consistency — the approved counter sample becomes the reference for every reorder.
Common uses
- Caps
- Trousers
- Dresses
- Jackets
- Activewear
- Boots
How to specify it
- Name the base material in the tech pack, not just the item.
- Fix the size and tolerance in writing before sampling starts.
- Approve a counter sample made from the actual bulk base material.
- Order the test report against the standard your market requires.
- Retain a golden sample at the factory and a second one with you.
Related reading
Related specifications on this site cover metal zipper, silicone gripper tape, digital print fabric, mesh fabric, and the processes most often paired with cord stopper include epoxy coating, anti-pilling finish, weft knitting.
If you are comparing suppliers, send us the spec they quoted against. We will quote the same spec and show you where the difference sits.
