Brass Non-Woven Fabric for Sportswear — Specification, Uses and Sourcing Notes
Brass Non-Woven Fabric for Sportswear: Specification, Uses and Sourcing Notes
Brass Non-Woven Fabric is the version buyers specify for sportswear when the base material is fixed by performance rather than by price. This entry sets out what the material actually changes, which specification to write into the tech pack, and where the cost sits — the three questions that decide whether the item passes bulk approval.
What it is
Brass gives non-woven fabric its weight-to-strength ratio. In practice that means the fabric behaves differently in cutting, in finishing and in wear: the finish has to be applied before assembly. Buyers who specify the material up front avoid the most common failure — an item that looks right on the sample card and behaves differently in bulk.
Typical specification
| Item | Non-Woven Fabric |
|---|---|
| Base material | Brass |
| Standard size | 320 gsm |
| Common finishes | Sandblasted Finish, Antique Copper Finish, Antique Brass Plating |
| Processes | Brushing, Warp Knitting, Weft Knitting |
| Typical application | Sportswear |
| Related applications | Shirts, Baby Clothing, Bras, Down Jackets |
| Test standard | RoHS |
| Usual packing | 100 pieces per polybag, 2000 per carton |
Properties that matter in buying
- Dimensional stability — 2% allowance is built into the spec before cutting.
- Colour fastness — tested to RoHS on the actual base material, not on a substitute.
- Mechanical performance — cycle life after 20 cycles or washes.
- Compliance — RoHS documentation issued with the shipment.
- Consistency — the approved counter sample becomes the reference for every reorder.
Common uses
- Yoga Wear
- Boots
- Shirts
- Bedding Sets
- Outdoor Tents
- Sleepwear
How to specify it
- Name the base material in the tech pack, not just the item.
- Fix the size and tolerance in writing before sampling starts.
- Approve a counter sample made from the actual bulk base material.
- Order the test report against the standard your market requires.
- Retain a golden sample at the factory and a second one with you.
Related reading
Related specifications on this site cover tencel lyocell fabric, velvet fabric, viscose fabric, pu coated fabric, and the processes most often paired with non-woven fabric include sanforising, warp knitting, digital printing.
Send the reference sample or tech pack and we will come back with a costed specification, a sampling timetable and the compliance documents your market requires.
