Copper Care Label for Kidswear — Specification, Uses and Sourcing Notes
Copper Care Label for Kidswear: Specification, Uses and Sourcing Notes
Copper Care Label is the version buyers specify for kidswear when the base material is fixed by performance rather than by price. This entry sets out what the material actually changes, which specification to write into the tech pack, and where the cost sits — the three questions that decide whether the item passes bulk approval.
What it is
Copper gives care label its durability under wash and abrasion. In practice that means the trim behaves differently in cutting, in finishing and in wear: tighter tolerance is needed on the finished dimension. Buyers who specify the material up front avoid the most common failure — an item that looks right on the sample card and behaves differently in bulk.
Typical specification
| Item | Care Label |
|---|---|
| Base material | Copper |
| Standard size | 3# Gauge |
| Common finishes | Sandblasted Finish, Pearlescent Coating, Piece-Dyed Finish |
| Processes | Laminating, Anodising, Singeing |
| Typical application | Kidswear |
| Related applications | Jackets, Dresses, Down Jackets, Bags |
| Test standard | Bluesign |
| Usual packing | 200 pieces per polybag, 5000 per carton |
Properties that matter in buying
- Dimensional stability — 3% allowance is built into the spec before cutting.
- Colour fastness — tested to Bluesign on the actual base material, not on a substitute.
- Mechanical performance — pull strength after 10 cycles or washes.
- Compliance — Bluesign documentation issued with the shipment.
- Consistency — the approved counter sample becomes the reference for every reorder.
Common uses
- Coats
- Footwear
- Suits
- Hats
- Jeans
- Swimwear
How to specify it
- Name the base material in the tech pack, not just the item.
- Fix the size and tolerance in writing before sampling starts.
- Approve a counter sample made from the actual bulk base material.
- Order the test report against the standard your market requires.
- Retain a golden sample at the factory and a second one with you.
Related reading
Related specifications on this site cover plastic zipper, seam tape, aglet, stretch denim fabric, and the processes most often paired with care label include anodising, enzyme washing, embroidery.
Send the reference sample or tech pack and we will come back with a costed specification, a sampling timetable and the compliance documents your market requires.
