Iron Reflective Tape for Lingerie — Specification, Uses and Sourcing Notes
Iron Reflective Tape for Lingerie: Specification, Uses and Sourcing Notes
Iron Reflective Tape is the version buyers specify for lingerie when the base material is fixed by performance rather than by price. This entry sets out what the material actually changes, which specification to write into the tech pack, and where the cost sits — the three questions that decide whether the item passes bulk approval.
What it is
Iron gives reflective tape its weight-to-strength ratio. In practice that means the trim behaves differently in cutting, in finishing and in wear: plating and coating adhesion must be tested on the actual base. Buyers who specify the material up front avoid the most common failure — an item that looks right on the sample card and behaves differently in bulk.
Typical specification
| Item | Reflective Tape |
|---|---|
| Base material | Iron |
| Standard size | 8# Gauge |
| Common finishes | Powder Coating, Sandblasted Finish, Mercerised Finish |
| Processes | Rotary Printing, Piece Dyeing, Water Repellent Finishing |
| Typical application | Lingerie |
| Related applications | Bras, Bridal Gowns, Trousers, Coats |
| Test standard | California Prop 65 |
| Usual packing | 500 pieces per polybag, 5000 per carton |
Properties that matter in buying
- Dimensional stability — 3% allowance is built into the spec before cutting.
- Colour fastness — tested to California Prop 65 on the actual base material, not on a substitute.
- Mechanical performance — cycle life after 10 cycles or washes.
- Compliance — California Prop 65 documentation issued with the shipment.
- Consistency — the approved counter sample becomes the reference for every reorder.
Common uses
- Bags
- Suits
- Shirts
- Sneakers
- Trousers
- Blouses
How to specify it
- Name the base material in the tech pack, not just the item.
- Fix the size and tolerance in writing before sampling starts.
- Approve a counter sample made from the actual bulk base material.
- Order the test report against the standard your market requires.
- Retain a golden sample at the factory and a second one with you.
Related reading
Related specifications on this site cover press stud, nylon fabric, chambray fabric, leather hang tag, and the processes most often paired with reflective tape include enamel filling, metal stamping, anodising.
Share the programme details and we will propose two alternatives — one optimised for unit cost, one for lead time — and let you choose.
