Wood Cord End for Kidswear — Specification, Uses and Sourcing Notes
Wood Cord End for Kidswear: Specification, Uses and Sourcing Notes
Wood Cord End is the version buyers specify for kidswear when the base material is fixed by performance rather than by price. This entry sets out what the material actually changes, which specification to write into the tech pack, and where the cost sits — the three questions that decide whether the item passes bulk approval.
What it is
Wood gives cord end its durability under wash and abrasion. In practice that means the trim behaves differently in cutting, in finishing and in wear: tighter tolerance is needed on the finished dimension. Buyers who specify the material up front avoid the most common failure — an item that looks right on the sample card and behaves differently in bulk.
Typical specification
| Item | Cord End |
|---|---|
| Base material | Wood |
| Standard size | 5# Gauge |
| Common finishes | Black Nickel Finish, Epoxy Doming, Yarn-Dyed Finish |
| Processes | Embossing, Calendering, Sublimation Printing |
| Typical application | Kidswear |
| Related applications | Sportswear, Boots, Underwear, Coats |
| Test standard | GB 18401 |
| Usual packing | 500 pieces per polybag, 2000 per carton |
Properties that matter in buying
- Dimensional stability — 2% allowance is built into the spec before cutting.
- Colour fastness — tested to GB 18401 on the actual base material, not on a substitute.
- Mechanical performance — cycle life after 20 cycles or washes.
- Compliance — GB 18401 documentation issued with the shipment.
- Consistency — the approved counter sample becomes the reference for every reorder.
Common uses
- Activewear
- Dresses
- Gloves
- Jeans
- Home Curtains
- Workwear
How to specify it
- Name the base material in the tech pack, not just the item.
- Fix the size and tolerance in writing before sampling starts.
- Approve a counter sample made from the actual bulk base material.
- Order the test report against the standard your market requires.
- Retain a golden sample at the factory and a second one with you.
Related reading
Related specifications on this site cover embroidery thread, jeans button, pique knit fabric, bungee cord, and the processes most often paired with cord end include sublimation printing, yarn dyeing, ultrasonic welding.
Share the programme details and we will propose two alternatives — one optimised for unit cost, one for lead time — and let you choose.
