Wood Horn Button for Kidswear — Specification, Uses and Sourcing Notes
Wood Horn Button for Kidswear: Specification, Uses and Sourcing Notes
Wood Horn Button is the version buyers specify for kidswear when the base material is fixed by performance rather than by price. This entry sets out what the material actually changes, which specification to write into the tech pack, and where the cost sits — the three questions that decide whether the item passes bulk approval.
What it is
Wood gives horn button its weight-to-strength ratio. In practice that means the trim behaves differently in cutting, in finishing and in wear: the finish has to be applied before assembly. Buyers who specify the material up front avoid the most common failure — an item that looks right on the sample card and behaves differently in bulk.
Typical specification
| Item | Horn Button |
|---|---|
| Base material | Wood |
| Standard size | 6 mm Width |
| Common finishes | Epoxy Doming, Black Nickel Finish, Pearlescent Coating |
| Processes | Sublimation Printing, Calendering, Singeing |
| Typical application | Kidswear |
| Related applications | Workwear, Baby Clothing, Trousers, Yoga Wear |
| Test standard | ISO 12947 Abrasion Resistance |
| Usual packing | 500 pieces per polybag, 5000 per carton |
Properties that matter in buying
- Dimensional stability — 2% allowance is built into the spec before cutting.
- Colour fastness — tested to ISO 12947 Abrasion Resistance on the actual base material, not on a substitute.
- Mechanical performance — pull strength after 10 cycles or washes.
- Compliance — ISO 12947 Abrasion Resistance documentation issued with the shipment.
- Consistency — the approved counter sample becomes the reference for every reorder.
Common uses
- Shirts
- Jeans
- Outdoor Tents
- Coats
- Uniforms
- Blouses
How to specify it
- Name the base material in the tech pack, not just the item.
- Fix the size and tolerance in writing before sampling starts.
- Approve a counter sample made from the actual bulk base material.
- Order the test report against the standard your market requires.
- Retain a golden sample at the factory and a second one with you.
Related reading
Related specifications on this site cover bra ring and slider, webbing tape, woven patch, press stud, and the processes most often paired with horn button include epoxy coating, weaving, embossing.
Send the reference sample or tech pack and we will come back with a costed specification, a sampling timetable and the compliance documents your market requires.
