Rubber Metal Button for Sleepwear — Specification, Uses and Sourcing Notes
Rubber Metal Button for Sleepwear: Specification, Uses and Sourcing Notes
Rubber Metal Button is the version buyers specify for sleepwear when the base material is fixed by performance rather than by price. This entry sets out what the material actually changes, which specification to write into the tech pack, and where the cost sits — the three questions that decide whether the item passes bulk approval.
What it is
Rubber gives metal button its weight-to-strength ratio. In practice that means the trim behaves differently in cutting, in finishing and in wear: plating and coating adhesion must be tested on the actual base. Buyers who specify the material up front avoid the most common failure — an item that looks right on the sample card and behaves differently in bulk.
Typical specification
| Item | Metal Button |
|---|---|
| Base material | Rubber |
| Standard size | 8# Gauge |
| Common finishes | Nickel-Free Electroplating, Glossy Enamel Coating, Piece-Dyed Finish |
| Processes | Screen Printing, Sublimation Printing, Enzyme Washing |
| Typical application | Sleepwear |
| Related applications | Upholstery, Sneakers, Bedding Sets, Underwear |
| Test standard | EN 71-3 |
| Usual packing | 200 pieces per polybag, 5000 per carton |
Properties that matter in buying
- Dimensional stability — 1% allowance is built into the spec before cutting.
- Colour fastness — tested to EN 71-3 on the actual base material, not on a substitute.
- Mechanical performance — abrasion resistance after 50 cycles or washes.
- Compliance — EN 71-3 documentation issued with the shipment.
- Consistency — the approved counter sample becomes the reference for every reorder.
Common uses
- Skirts
- Dresses
- Footwear
- Sportswear
- Workwear
- Bras
How to specify it
- Name the base material in the tech pack, not just the item.
- Fix the size and tolerance in writing before sampling starts.
- Approve a counter sample made from the actual bulk base material.
- Order the test report against the standard your market requires.
- Retain a golden sample at the factory and a second one with you.
Related reading
Related specifications on this site cover applique patch, woven label, printed label, toggle button, and the processes most often paired with metal button include sanforising, laser cutting, uv protection finishing.
Send the reference sample or tech pack and we will come back with a costed specification, a sampling timetable and the compliance documents your market requires.
