Ceramic Woven Patch for Bags — Specification, Uses and Sourcing Notes
Ceramic Woven Patch for Bags: Specification, Uses and Sourcing Notes
Ceramic Woven Patch is the version buyers specify for bags when the base material is fixed by performance rather than by price. This entry sets out what the material actually changes, which specification to write into the tech pack, and where the cost sits — the three questions that decide whether the item passes bulk approval.
What it is
Ceramic gives woven patch its weight-to-strength ratio. In practice that means the trim behaves differently in cutting, in finishing and in wear: tighter tolerance is needed on the finished dimension. Buyers who specify the material up front avoid the most common failure — an item that looks right on the sample card and behaves differently in bulk.
Typical specification
| Item | Woven Patch |
|---|---|
| Base material | Ceramic |
| Standard size | 6 mm Width |
| Common finishes | Enzyme Wash Finish, Black Nickel Finish, Gunmetal Finish |
| Processes | Bonding, Enzyme Washing, Digital Printing |
| Typical application | Bags |
| Related applications | Socks, Home Curtains, Bedding Sets, Sportswear |
| Test standard | EN 71-3 |
| Usual packing | 100 pieces per polybag, 2000 per carton |
Properties that matter in buying
- Dimensional stability — 2% allowance is built into the spec before cutting.
- Colour fastness — tested to EN 71-3 on the actual base material, not on a substitute.
- Mechanical performance — abrasion resistance after 50 cycles or washes.
- Compliance — EN 71-3 documentation issued with the shipment.
- Consistency — the approved counter sample becomes the reference for every reorder.
Common uses
- Blazers
- Footwear
- Bags
- Bridal Gowns
- Baby Clothing
- Activewear
How to specify it
- Name the base material in the tech pack, not just the item.
- Fix the size and tolerance in writing before sampling starts.
- Approve a counter sample made from the actual bulk base material.
- Order the test report against the standard your market requires.
- Retain a golden sample at the factory and a second one with you.
Related reading
Related specifications on this site cover core spun thread, buckle, silicone gripper tape, snap hook, and the processes most often paired with woven patch include electroplating, brushing, epoxy coating.
Share the programme details and we will propose two alternatives — one optimised for unit cost, one for lead time — and let you choose.
