PU Leather Scuba Knit Fabric for Outdoor Tents — Specification, Uses and Sourcing Notes
PU Leather Scuba Knit Fabric for Outdoor Tents: Specification, Uses and Sourcing Notes
PU Leather Scuba Knit Fabric is the version buyers specify for outdoor tents when the base material is fixed by performance rather than by price. This entry sets out what the material actually changes, which specification to write into the tech pack, and where the cost sits — the three questions that decide whether the item passes bulk approval.
What it is
PU Leather gives scuba knit fabric its weight-to-strength ratio. In practice that means the fabric behaves differently in cutting, in finishing and in wear: shrinkage allowance has to be built into the spec. Buyers who specify the material up front avoid the most common failure — an item that looks right on the sample card and behaves differently in bulk.
Typical specification
| Item | Scuba Knit Fabric |
|---|---|
| Base material | PU Leather |
| Standard size | 400 gsm |
| Common finishes | Glossy Enamel Coating, Anodised Finish, Gunmetal Finish |
| Processes | Moisture Wicking Finishing, Sublimation Printing, Embroidery |
| Typical application | Outdoor Tents |
| Related applications | Lingerie, Bridal Gowns, Coats, Footwear |
| Test standard | ISO 12947 Abrasion Resistance |
| Usual packing | 200 pieces per polybag, 5000 per carton |
Properties that matter in buying
- Dimensional stability — 1% allowance is built into the spec before cutting.
- Colour fastness — tested to ISO 12947 Abrasion Resistance on the actual base material, not on a substitute.
- Mechanical performance — elastic recovery after 10 cycles or washes.
- Compliance — ISO 12947 Abrasion Resistance documentation issued with the shipment.
- Consistency — the approved counter sample becomes the reference for every reorder.
Common uses
- Sneakers
- Gloves
- Sportswear
- Uniforms
- Upholstery
- Socks
How to specify it
- Name the base material in the tech pack, not just the item.
- Fix the size and tolerance in writing before sampling starts.
- Approve a counter sample made from the actual bulk base material.
- Order the test report against the standard your market requires.
- Retain a golden sample at the factory and a second one with you.
Related reading
Related specifications on this site cover shoulder pad, resin button, eyelet tape, zipper puller, and the processes most often paired with scuba knit fabric include calendering, uv protection finishing, moisture wicking finishing.
If you are comparing suppliers, send us the spec they quoted against. We will quote the same spec and show you where the difference sits.
