ABS Resin Cord Lock for Boots — Specification, Uses and Sourcing Notes
ABS Resin Cord Lock for Boots: Specification, Uses and Sourcing Notes
ABS Resin Cord Lock is the version buyers specify for boots when the base material is fixed by performance rather than by price. This entry sets out what the material actually changes, which specification to write into the tech pack, and where the cost sits — the three questions that decide whether the item passes bulk approval.
What it is
ABS Resin gives cord lock its weight-to-strength ratio. In practice that means the trim behaves differently in cutting, in finishing and in wear: shrinkage allowance has to be built into the spec. Buyers who specify the material up front avoid the most common failure — an item that looks right on the sample card and behaves differently in bulk.
Typical specification
| Item | Cord Lock |
|---|---|
| Base material | ABS Resin |
| Standard size | 15 mm Width |
| Common finishes | Soft-Touch Rubber Coating, Epoxy Doming, Gunmetal Finish |
| Processes | Garment Washing, Sublimation Printing, Heat Setting |
| Typical application | Boots |
| Related applications | Evening Wear, Underwear, Skirts, Coats |
| Test standard | WRAP |
| Usual packing | 200 pieces per polybag, 10000 per carton |
Properties that matter in buying
- Dimensional stability — 2% allowance is built into the spec before cutting.
- Colour fastness — tested to WRAP on the actual base material, not on a substitute.
- Mechanical performance — abrasion resistance after 20 cycles or washes.
- Compliance — WRAP documentation issued with the shipment.
- Consistency — the approved counter sample becomes the reference for every reorder.
Common uses
- Bedding Sets
- Bags
- Upholstery
- Sneakers
- Jackets
- Scarves
How to specify it
- Name the base material in the tech pack, not just the item.
- Fix the size and tolerance in writing before sampling starts.
- Approve a counter sample made from the actual bulk base material.
- Order the test report against the standard your market requires.
- Retain a golden sample at the factory and a second one with you.
Related reading
Related specifications on this site cover eyelet tape, lobster clasp, woven label, plastic zipper, and the processes most often paired with cord lock include anti-pilling finish, flame retardant finishing, sublimation printing.
Share the programme details and we will propose two alternatives — one optimised for unit cost, one for lead time — and let you choose.
