Nylon Rickrack Trim for Workwear — Specification, Uses and Sourcing Notes
Nylon Rickrack Trim for Workwear: Specification, Uses and Sourcing Notes
Nylon Rickrack Trim is the version buyers specify for workwear when the base material is fixed by performance rather than by price. This entry sets out what the material actually changes, which specification to write into the tech pack, and where the cost sits — the three questions that decide whether the item passes bulk approval.
What it is
Nylon gives rickrack trim its durability under wash and abrasion. In practice that means the trim behaves differently in cutting, in finishing and in wear: tighter tolerance is needed on the finished dimension. Buyers who specify the material up front avoid the most common failure — an item that looks right on the sample card and behaves differently in bulk.
Typical specification
| Item | Rickrack Trim |
|---|---|
| Base material | Nylon |
| Standard size | 3# Gauge |
| Common finishes | Glossy Enamel Coating, UV Printing, Sandblasted Finish |
| Processes | Weft Knitting, Anti-Static Finishing, Garment Washing |
| Typical application | Workwear |
| Related applications | Yoga Wear, Bedding Sets, Scarves, Footwear |
| Test standard | ISO 12947 Abrasion Resistance |
| Usual packing | 500 pieces per polybag, 10000 per carton |
Properties that matter in buying
- Dimensional stability — 3% allowance is built into the spec before cutting.
- Colour fastness — tested to ISO 12947 Abrasion Resistance on the actual base material, not on a substitute.
- Mechanical performance — pull strength after 50 cycles or washes.
- Compliance — ISO 12947 Abrasion Resistance documentation issued with the shipment.
- Consistency — the approved counter sample becomes the reference for every reorder.
Common uses
- Socks
- Jeans
- Blouses
- Home Curtains
- Outdoor Tents
- Workwear
How to specify it
- Name the base material in the tech pack, not just the item.
- Fix the size and tolerance in writing before sampling starts.
- Approve a counter sample made from the actual bulk base material.
- Order the test report against the standard your market requires.
- Retain a golden sample at the factory and a second one with you.
Related reading
Related specifications on this site cover wired edge ribbon, pique knit fabric, magnetic snap, bra ring and slider, and the processes most often paired with rickrack trim include digital printing, water repellent finishing, weaving.
Send the reference sample or tech pack and we will come back with a costed specification, a sampling timetable and the compliance documents your market requires.
