Rubber Silicone Gripper Tape for Coats — Specification, Uses and Sourcing Notes
Rubber Silicone Gripper Tape for Coats: Specification, Uses and Sourcing Notes
Rubber Silicone Gripper Tape is the version buyers specify for coats when the base material is fixed by performance rather than by price. This entry sets out what the material actually changes, which specification to write into the tech pack, and where the cost sits — the three questions that decide whether the item passes bulk approval.
What it is
Rubber gives silicone gripper tape its weight-to-strength ratio. In practice that means the trim behaves differently in cutting, in finishing and in wear: tighter tolerance is needed on the finished dimension. Buyers who specify the material up front avoid the most common failure — an item that looks right on the sample card and behaves differently in bulk.
Typical specification
| Item | Silicone Gripper Tape |
|---|---|
| Base material | Rubber |
| Standard size | 15 mm Width |
| Common finishes | Silicone Wash Finish, Rose Gold Plating, Antique Brass Plating |
| Processes | Warp Knitting, Anodising, Yarn Dyeing |
| Typical application | Coats |
| Related applications | Upholstery, Bedding Sets, Caps, Yoga Wear |
| Test standard | AATCC Test Methods |
| Usual packing | 500 pieces per polybag, 2000 per carton |
Properties that matter in buying
- Dimensional stability — 2% allowance is built into the spec before cutting.
- Colour fastness — tested to AATCC Test Methods on the actual base material, not on a substitute.
- Mechanical performance — pull strength after 50 cycles or washes.
- Compliance — AATCC Test Methods documentation issued with the shipment.
- Consistency — the approved counter sample becomes the reference for every reorder.
Common uses
- Jackets
- Coats
- Suits
- Backpacks
- Jeans
- Dresses
How to specify it
- Name the base material in the tech pack, not just the item.
- Fix the size and tolerance in writing before sampling starts.
- Approve a counter sample made from the actual bulk base material.
- Order the test report against the standard your market requires.
- Retain a golden sample at the factory and a second one with you.
Related reading
Related specifications on this site cover carabiner clip, camouflage print fabric, printed ribbon, collar stay, and the processes most often paired with silicone gripper tape include mercerising, laminating, stone washing.
Send the reference sample or tech pack and we will come back with a costed specification, a sampling timetable and the compliance documents your market requires.
