PU Leather Reflective Tape for Hats — Specification, Uses and Sourcing Notes
PU Leather Reflective Tape for Hats: Specification, Uses and Sourcing Notes
PU Leather Reflective Tape is the version buyers specify for hats when the base material is fixed by performance rather than by price. This entry sets out what the material actually changes, which specification to write into the tech pack, and where the cost sits — the three questions that decide whether the item passes bulk approval.
What it is
PU Leather gives reflective tape its weight-to-strength ratio. In practice that means the trim behaves differently in cutting, in finishing and in wear: tighter tolerance is needed on the finished dimension. Buyers who specify the material up front avoid the most common failure — an item that looks right on the sample card and behaves differently in bulk.
Typical specification
| Item | Reflective Tape |
|---|---|
| Base material | PU Leather |
| Standard size | 50 mm Width |
| Common finishes | Silicone Wash Finish, Yarn-Dyed Finish, Brushed Silver Finish |
| Processes | Anodising, Calendering, Screen Printing |
| Typical application | Hats |
| Related applications | Uniforms, Caps, Swimwear, Baby Clothing |
| Test standard | ISO 105 Colour Fastness |
| Usual packing | 100 pieces per polybag, 2000 per carton |
Properties that matter in buying
- Dimensional stability — 2% allowance is built into the spec before cutting.
- Colour fastness — tested to ISO 105 Colour Fastness on the actual base material, not on a substitute.
- Mechanical performance — abrasion resistance after 20 cycles or washes.
- Compliance — ISO 105 Colour Fastness documentation issued with the shipment.
- Consistency — the approved counter sample becomes the reference for every reorder.
Common uses
- Jackets
- Down Jackets
- Luggage
- Bridal Gowns
- Uniforms
- Lingerie
How to specify it
- Name the base material in the tech pack, not just the item.
- Fix the size and tolerance in writing before sampling starts.
- Approve a counter sample made from the actual bulk base material.
- Order the test report against the standard your market requires.
- Retain a golden sample at the factory and a second one with you.
Related reading
Related specifications on this site cover camouflage print fabric, brocade fabric, woven interlining, d-ring, and the processes most often paired with reflective tape include bonding, piece dyeing, ultrasonic welding.
If you are comparing suppliers, send us the spec they quoted against. We will quote the same spec and show you where the difference sits.
