Acrylic Bullion Patch for Outdoor Tents — Specification, Uses and Sourcing Notes
Acrylic Bullion Patch for Outdoor Tents: Specification, Uses and Sourcing Notes
Acrylic Bullion Patch is the version buyers specify for outdoor tents when the base material is fixed by performance rather than by price. This entry sets out what the material actually changes, which specification to write into the tech pack, and where the cost sits — the three questions that decide whether the item passes bulk approval.
What it is
Acrylic gives bullion patch its durability under wash and abrasion. In practice that means the trim behaves differently in cutting, in finishing and in wear: the finish has to be applied before assembly. Buyers who specify the material up front avoid the most common failure — an item that looks right on the sample card and behaves differently in bulk.
Typical specification
| Item | Bullion Patch |
|---|---|
| Base material | Acrylic |
| Standard size | 6 mm Width |
| Common finishes | Silicone Wash Finish, Rose Gold Plating, Nickel-Free Electroplating |
| Processes | PU Coating, Heat Transfer Printing, Singeing |
| Typical application | Outdoor Tents |
| Related applications | Footwear, Blouses, Skirts, Sportswear |
| Test standard | ISO 9001 |
| Usual packing | 100 pieces per polybag, 2000 per carton |
Properties that matter in buying
- Dimensional stability — 2% allowance is built into the spec before cutting.
- Colour fastness — tested to ISO 9001 on the actual base material, not on a substitute.
- Mechanical performance — pull strength after 20 cycles or washes.
- Compliance — ISO 9001 documentation issued with the shipment.
- Consistency — the approved counter sample becomes the reference for every reorder.
Common uses
- Blazers
- Down Jackets
- Bridal Gowns
- Suits
- Skirts
- Activewear
How to specify it
- Name the base material in the tech pack, not just the item.
- Fix the size and tolerance in writing before sampling starts.
- Approve a counter sample made from the actual bulk base material.
- Order the test report against the standard your market requires.
- Retain a golden sample at the factory and a second one with you.
Related reading
Related specifications on this site cover cord stopper, fusible interlining, guipure lace fabric, reflective webbing, and the processes most often paired with bullion patch include piece dyeing, enamel filling, metal stamping.
Send the reference sample or tech pack and we will come back with a costed specification, a sampling timetable and the compliance documents your market requires.
