Zinc Alloy Woven Hang Tag for Sleepwear — Specification, Uses and Sourcing Notes
Zinc Alloy Woven Hang Tag for Sleepwear: Specification, Uses and Sourcing Notes
Zinc Alloy Woven Hang Tag is the version buyers specify for sleepwear when the base material is fixed by performance rather than by price. This entry sets out what the material actually changes, which specification to write into the tech pack, and where the cost sits — the three questions that decide whether the item passes bulk approval.
What it is
Zinc Alloy gives woven hang tag its strength and surface character. In practice that means the trim behaves differently in cutting, in finishing and in wear: shrinkage allowance has to be built into the spec. Buyers who specify the material up front avoid the most common failure — an item that looks right on the sample card and behaves differently in bulk.
Typical specification
| Item | Woven Hang Tag |
|---|---|
| Base material | Zinc Alloy |
| Standard size | 8# Gauge |
| Common finishes | Powder Coating, Epoxy Doming, Enzyme Wash Finish |
| Processes | Piece Dyeing, Warp Knitting, Embossing |
| Typical application | Sleepwear |
| Related applications | Down Jackets, Luggage, Coats, Outdoor Tents |
| Test standard | GRS |
| Usual packing | 500 pieces per polybag, 5000 per carton |
Properties that matter in buying
- Dimensional stability — 1% allowance is built into the spec before cutting.
- Colour fastness — tested to GRS on the actual base material, not on a substitute.
- Mechanical performance — pull strength after 10 cycles or washes.
- Compliance — GRS documentation issued with the shipment.
- Consistency — the approved counter sample becomes the reference for every reorder.
Common uses
- Swimwear
- Hats
- Bedding Sets
- Outdoor Tents
- Footwear
- Bras
How to specify it
- Name the base material in the tech pack, not just the item.
- Fix the size and tolerance in writing before sampling starts.
- Approve a counter sample made from the actual bulk base material.
- Order the test report against the standard your market requires.
- Retain a golden sample at the factory and a second one with you.
Related reading
Related specifications on this site cover shell button, poplin fabric, fur trim, crepe fabric, and the processes most often paired with woven hang tag include enamel filling, heat transfer printing, weft knitting.
Send the reference sample or tech pack and we will come back with a costed specification, a sampling timetable and the compliance documents your market requires.
