Leather Hang Tag with Epoxy Doming for Down Jackets
This leather hang tag is supplied to a written specification so that reorders match the approved sample. The product spec is fixed at quotation stage — base material, the epoxy doming surface, the 9 mm Width and the packing — and held on file, which is what keeps down jackets consistent across seasons instead of drifting with whatever the mill happens to have in stock.
The usual reason buyers come to us is not price. It is elastic that lost recovery after three washes, or shrinkage that only showed up after the first wash. Both are preventable once the specification is written down before bulk starts.
Specification
| Product | Leather Hang Tag |
|---|---|
| Finish / process | Epoxy Doming |
| Typical application | Down Jackets |
| Base material | ABS Resin |
| Standard size | 9 mm Width |
| Colour matching | 12 Pantone or lab-dip matched shades |
| MOQ | 3,000 pieces per specification |
| Sampling | 7 working days, 3 days per revision |
| Bulk lead time | 25-55 days after approval |
| Compliance | AATCC Test Methods |
Material and finish options
- Brass — the cost-effective default for volume programmes
- Recycled PET — selected when the item is in skin contact and needs to test clean
- ABS Resin — chosen where strength and wear resistance come first
- Silicone — selected when the item is in skin contact and needs to test clean
- Ceramic — selected when the item is in skin contact and needs to test clean
Processes available on this item
- Embroidery
- Water Repellent Finishing
- UV Protection Finishing
- Enzyme Washing
- Garment Washing
- Singeing
Where it is used
The specification above is the one most often ordered for Down Jackets. Related applications on the same base include suits, dresses, jeans, boots, down jackets.
Quality and packing
- In-line inspection with AQL 1.5 sampling on every lot.
- Photo report shared before the balance payment is due.
- Packed to your own carton ratio and barcode specification.
- Test reports issued against AATCC Test Methods with the shipment.
- Golden sample retained at the factory, second one held by the buyer.
FAQ
Can you handle our own artwork or tooling?
Yes. Artwork files or existing tooling can be used; we confirm tolerances in writing before the first production run.
Can you match a physical sample?
Yes. Send the reference and we reverse engineer the specification, then produce a counter sample for approval before any bulk commitment.
What happens if a bulk lot fails inspection?
The lot is reworked or remade at our cost. Inspection reports are shared before the balance payment is due.
How long does sampling take?
7 working days for the first sample, with 3 days per revision round. Plated or dyed-to-match items add a few days.
If you are comparing suppliers, send us the spec they quoted against. We will quote the same spec and show you where the difference sits.
