Closed-End Zipper with UV Printing for Dresses
This closed-end zipper is supplied to a written specification so that reorders match the approved sample. The product spec is fixed at quotation stage — base material, the uv printing surface, the 32 mm Width and the packing — and held on file, which is what keeps dresses consistent across seasons instead of drifting with whatever the mill happens to have in stock.
The usual reason buyers come to us is not price. It is an interlining that bubbled after the first press, or a trim that passed sampling but failed in-line because it was never cycle tested. Both are preventable once the specification is written down before bulk starts.
Specification
| Product | Closed-End Zipper |
|---|---|
| Finish / process | UV Printing |
| Typical application | Dresses |
| Base material | Ceramic |
| Standard size | 32 mm Width |
| Colour matching | 16 Pantone or lab-dip matched shades |
| MOQ | 2,000 pieces per specification |
| Sampling | 7 working days, 3 days per revision |
| Bulk lead time | 25-30 days after approval |
| Compliance | ISO 105 Colour Fastness |
Material and finish options
- Rubber — used when the finish has to hold a plating or coating
- ABS Resin — chosen where strength and wear resistance come first
- Zinc Alloy — used when the finish has to hold a plating or coating
- Cotton — chosen where strength and wear resistance come first
- Recycled PET — used when the finish has to hold a plating or coating
Processes available on this item
- Bonding
- Anodising
- PU Coating
- Weaving
- Mercerising
- Piece Dyeing
Where it is used
The specification above is the one most often ordered for Dresses. Related applications on the same base include hats, underwear, blouses, lingerie, home curtains.
Quality and packing
- In-line inspection with AQL 1.5 sampling on every lot.
- Photo report shared before the balance payment is due.
- Packed to your own carton ratio and barcode specification.
- Test reports issued against ISO 105 Colour Fastness with the shipment.
- Golden sample retained at the factory, second one held by the buyer.
FAQ
What happens if a bulk lot fails inspection?
The lot is reworked or remade at our cost. Inspection reports are shared before the balance payment is due.
Do you hold stock for reorders?
Approved specifications are kept on file and, for repeat programmes, base material can be reserved against a rolling forecast.
Can you match a physical sample?
Yes. Send the reference and we reverse engineer the specification, then produce a counter sample for approval before any bulk commitment.
Which compliance documents do you provide?
ISO 105 Colour Fastness documentation is issued with the shipment. Test reports can be ordered against any additional standard you nominate.
Share the programme details and we will propose two alternatives — one optimised for unit cost, one for lead time — and let you choose.
