Seat Belt Webbing with Sandblasted Finish for Caps
This seat belt webbing is supplied to a written specification so that reorders match the approved sample. The product spec is fixed at quotation stage — base material, the sandblasted finish surface, the 25 mm Width and the packing — and held on file, which is what keeps caps consistent across seasons instead of drifting with whatever the mill happens to have in stock.
The usual reason buyers come to us is not price. It is shade drift between the approved lab dip and the bulk lot, or shrinkage that only showed up after the first wash. Both are preventable once the specification is written down before bulk starts.
Specification
| Product | Seat Belt Webbing |
|---|---|
| Finish / process | Sandblasted Finish |
| Typical application | Caps |
| Base material | TPU |
| Standard size | 25 mm Width |
| Colour matching | 6 Pantone or lab-dip matched shades |
| MOQ | 5,000 pieces per specification |
| Sampling | 7 working days, 3 days per revision |
| Bulk lead time | 15-30 days after approval |
| Compliance | OEKO-TEX Standard 100 |
Material and finish options
- Stainless Steel — used when the finish has to hold a plating or coating
- Neoprene — chosen where strength and wear resistance come first
- Silicone — chosen where strength and wear resistance come first
- Ceramic — used when the finish has to hold a plating or coating
- POM Plastic — preferred when weight matters more than rigidity
Processes available on this item
- Stone Washing
- Embroidery
- Piece Dyeing
- Laser Cutting
- UV Protection Finishing
- Metal Stamping
Where it is used
The specification above is the one most often ordered for Caps. Related applications on the same base include boots, gloves, down jackets, luggage, footwear.
Quality and packing
- In-line inspection with AQL 2.5 sampling on every lot.
- Photo report shared before the balance payment is due.
- Packed to your own carton ratio and barcode specification.
- Test reports issued against OEKO-TEX Standard 100 with the shipment.
- Golden sample retained at the factory, second one held by the buyer.
FAQ
What are the payment and delivery terms?
Standard terms are a deposit with the order and the balance before shipment, under EXW / FOB / CIF / DDP as agreed.
Can you handle our own artwork or tooling?
Yes. Artwork files or existing tooling can be used; we confirm tolerances in writing before the first production run.
Can you match a physical sample?
Yes. Send the reference and we reverse engineer the specification, then produce a counter sample for approval before any bulk commitment.
How long does sampling take?
7 working days for the first sample, with 3 days per revision round. Plated or dyed-to-match items add a few days.
If you are comparing suppliers, send us the spec they quoted against. We will quote the same spec and show you where the difference sits.
