Cupro Fabric with Gunmetal Finish for Shirts
This cupro fabric is supplied to a written specification so that reorders match the approved sample. The fabric construction is fixed at quotation stage — base material, the gunmetal finish surface, the 280 gsm and the packing — and held on file, which is what keeps shirts consistent across seasons instead of drifting with whatever the mill happens to have in stock.
The usual reason buyers come to us is not price. It is a trim that passed sampling but failed in-line because it was never cycle tested, or an interlining that bubbled after the first press. Both are preventable once the specification is written down before bulk starts.
Specification
| Product | Cupro Fabric |
|---|---|
| Finish / process | Gunmetal Finish |
| Typical application | Shirts |
| Base material | Nylon |
| Standard size | 280 gsm |
| Colour matching | 16 Pantone or lab-dip matched shades |
| MOQ | 1,000 pieces per specification |
| Sampling | 10 working days, 5 days per revision |
| Bulk lead time | 20-30 days after approval |
| Compliance | ISO 14001 |
Material and finish options
- Acrylic — the cost-effective default for volume programmes
- Rubber — chosen where strength and wear resistance come first
- POM Plastic — the cost-effective default for volume programmes
- Silicone — used when the finish has to hold a plating or coating
- Nickel Silver — the cost-effective default for volume programmes
Processes available on this item
- Heat Transfer Printing
- UV Protection Finishing
- Calendering
- Singeing
- Laminating
- Anti-Bacterial Finishing
Where it is used
The specification above is the one most often ordered for Shirts. Related applications on the same base include sportswear, activewear, evening wear, home curtains, boots.
Quality and packing
- In-line inspection with AQL 4.0 sampling on every lot.
- Photo report shared before the balance payment is due.
- Packed to your own carton ratio and barcode specification.
- Test reports issued against ISO 14001 with the shipment.
- Golden sample retained at the factory, second one held by the buyer.
FAQ
What happens if a bulk lot fails inspection?
The lot is reworked or remade at our cost. Inspection reports are shared before the balance payment is due.
Do you hold stock for reorders?
Approved specifications are kept on file and, for repeat programmes, base material can be reserved against a rolling forecast.
How long does sampling take?
10 working days for the first sample, with 5 days per revision round. Plated or dyed-to-match items add a few days.
Can you match a physical sample?
Yes. Send the reference and we reverse engineer the specification, then produce a counter sample for approval before any bulk commitment.
Send the reference sample or tech pack and we will come back with a costed specification, a sampling timetable and the compliance documents your market requires.
