Nylon Zipper with Black Nickel Finish for Workwear
This nylon zipper is supplied to a written specification so that reorders match the approved sample. The product spec is fixed at quotation stage — base material, the black nickel finish surface, the 10# Gauge and the packing — and held on file, which is what keeps workwear consistent across seasons instead of drifting with whatever the mill happens to have in stock.
The usual reason buyers come to us is not price. It is shrinkage that only showed up after the first wash, or an interlining that bubbled after the first press. Both are preventable once the specification is written down before bulk starts.
Specification
| Product | Nylon Zipper |
|---|---|
| Finish / process | Black Nickel Finish |
| Typical application | Workwear |
| Base material | Brass |
| Standard size | 10# Gauge |
| Colour matching | 8 Pantone or lab-dip matched shades |
| MOQ | 2,000 pieces per specification |
| Sampling | 10 working days, 3 days per revision |
| Bulk lead time | 25-40 days after approval |
| Compliance | California Prop 65 |
Material and finish options
- Bamboo — selected when the item is in skin contact and needs to test clean
- Recycled PET — used when the finish has to hold a plating or coating
- Rubber — the cost-effective default for volume programmes
- Ceramic — used when the finish has to hold a plating or coating
- PU Leather — used when the finish has to hold a plating or coating
Processes available on this item
- Rotary Printing
- Anodising
- Piece Dyeing
- Mercerising
- Embossing
- Laser Cutting
Where it is used
The specification above is the one most often ordered for Workwear. Related applications on the same base include lingerie, bedding sets, bras, boots, blazers.
Quality and packing
- In-line inspection with AQL 2.5 sampling on every lot.
- Photo report shared before the balance payment is due.
- Packed to your own carton ratio and barcode specification.
- Test reports issued against California Prop 65 with the shipment.
- Golden sample retained at the factory, second one held by the buyer.
FAQ
Can you match a physical sample?
Yes. Send the reference and we reverse engineer the specification, then produce a counter sample for approval before any bulk commitment.
How long does sampling take?
10 working days for the first sample, with 3 days per revision round. Plated or dyed-to-match items add a few days.
Can you handle our own artwork or tooling?
Yes. Artwork files or existing tooling can be used; we confirm tolerances in writing before the first production run.
What happens if a bulk lot fails inspection?
The lot is reworked or remade at our cost. Inspection reports are shared before the balance payment is due.
Send the reference sample or tech pack and we will come back with a costed specification, a sampling timetable and the compliance documents your market requires.
