Custom Rivet — ABS Plastic with Antique Silver
We supply rivet to garment factories and brands, built in ABS Plastic with antique silver for uniform and corporate programmes. On a trim like this the specification that decides the outcome is plating durability on the high-friction face, so that is agreed in writing before bulk — not discovered when the first carton is opened on the line. Programmes start at 500 pieces per style per finish.
The failures here are predictable: unclear responsibility when a defect shows up after washing, or inconsistent sizing between production runs. We lock material, finish, dimension and tolerance before bulk, and prepare GB 18401 safety classification with GB/T 29862 fibre labelling so the shipment clears instead of sitting at port while your selling season passes.
Specification
| Product | Rivet |
|---|---|
| Cap diameter | 6 mm |
| Type | semi-tubular rivet |
| Base material | ABS Plastic |
| Finish / process | Antique Silver |
| Colour options | 6 Pantone-matched shades |
| Packing | packed to your size ratio |
| MOQ | 500 pieces per style per finish |
| Sampling | 14 working days, 5 days per revision |
| Bulk lead time | 15-40 days after approval |
| Compliance | GB 18401 safety classification with GB/T 29862 fibre labelling; azo dye-free declaration |
| Ship to | Shanghai or Shenzhen (Mainland China) |
What buyers can customise
- Die-Casting — available on ABS Plastic, quoted per position and per colour.
- Brushed Finish — available on ABS Plastic, quoted per position and per colour.
- Rubber Coating — available on ABS Plastic, quoted per position and per colour.
- Hot Foil Stamping — available on ABS Plastic, quoted per position and per colour.
- Paint Spray — available on ABS Plastic, quoted per position and per colour.
- Screen Printing — available on ABS Plastic, quoted per position and per colour.
- Heat Transfer Printing — available on ABS Plastic, quoted per position and per colour.
How we produce it
- Drawing or reference sample review, with size and finish confirmed
- Material selection and a finish sample or strike-off
- Prototype made to the agreed cap diameter
- Fit and wash test on the actual garment fabric, then a pre-production sample
- Bulk run with antique silver applied under controlled settings
- In-line inspection, final AQL 2.5 inspection and packing to your ratio
Where it is used
- Denim and workwear — hard-wearing finishes that survive industrial washing
- Outerwear and tailoring — matched to the shell fabric so it drapes with the garment
- Childrenswear and schoolwear — tested to the destination's safety standard
- Bridal and eveningwear — small runs with hand-finished detail
- Uniform and corporate programmes — repeatable spec held on file for reorders
Packing, testing and delivery
Trims are packed to the ratio you specify — by size, by colour or by garment set — with barcodes applied where the line needs them. Test reports for azo dye-free declaration are prepared for the destination market. We ship to Shanghai or Shenzhen with the commercial invoice, packing list and certificate of origin, and hold the approved reference so reorders reproduce the same material, the same finish and the same plating durability on the high-friction face.
FAQ
What is the minimum order?
Programmes start at 500 pieces per style per finish. Mixed sizes are fine within one style.
What packing options are available?
Bulk packed, carded, or packed to your own size and design ratio with barcodes applied.
How long does sampling take?
A first sample takes 14 working days, and each revision about 5 days.
Which compliance documents do you provide?
We prepare azo dye-free declaration and the supporting test reports for the destination market.
Start your rivet programme
Tell us the quantity, the target price and the delivery window — we will tell you what is realistic before you commit.
