Custom Sequin — Stainless Steel with Sewn Edge
We supply sequin to garment factories and brands, built in Stainless Steel with sewn edge for e-commerce and small-batch brands. On a trim like this the specification that decides the outcome is hole position, because off-centre holes skew the whole row, so that is agreed in writing before bulk — not discovered when the first carton is opened on the line. Programmes start at 2000 pieces per style per finish.
The failures here are predictable: colour drift between the approved sample and the bulk trim, or inconsistent sizing between production runs. We lock material, finish, dimension and tolerance before bulk, and prepare GB 18401 safety classification with GB/T 29862 fibre labelling so the shipment clears instead of sitting at port while your selling season passes.
Specification
| Product | Sequin |
|---|---|
| Size | 4 mm |
| Finish | holographic sequin |
| Base material | Stainless Steel |
| Finish / process | Sewn Edge |
| Colour options | 12 Pantone-matched shades |
| Packing | polybag per 100 |
| MOQ | 2000 pieces per style per finish |
| Sampling | 12 working days, 3 days per revision |
| Bulk lead time | 25-50 days after approval |
| Compliance | GB 18401 safety classification with GB/T 29862 fibre labelling; OEKO-TEX Standard 100 for dyes and trims |
| Ship to | Shanghai or Shenzhen (Mainland China) |
What buyers can customise
- Debossing — available on Stainless Steel, quoted per position and per colour.
- Injection Moulding — available on Stainless Steel, quoted per position and per colour.
- Paint Spray — available on Stainless Steel, quoted per position and per colour.
- Sewn Edge — available on Stainless Steel, quoted per position and per colour.
- Powder Coating — available on Stainless Steel, quoted per position and per colour.
- Heat Transfer Printing — available on Stainless Steel, quoted per position and per colour.
- UV Printing — available on Stainless Steel, quoted per position and per colour.
How we produce it
- Drawing or reference sample review, with size and finish confirmed
- Material selection and a finish sample or strike-off
- Prototype made to the agreed size
- Fit and wash test on the actual garment fabric, then a pre-production sample
- Bulk run with sewn edge applied under controlled settings
- In-line inspection, final AQL 2.5 inspection and packing to your ratio
Where it is used
- Denim and workwear — hard-wearing finishes that survive industrial washing
- Outerwear and tailoring — matched to the shell fabric so it drapes with the garment
- Childrenswear and schoolwear — tested to the destination's safety standard
- Bridal and eveningwear — small runs with hand-finished detail
- Uniform and corporate programmes — repeatable spec held on file for reorders
Packing, testing and delivery
Trims are packed to the ratio you specify — by size, by colour or by garment set — with barcodes applied where the line needs them. Test reports for OEKO-TEX Standard 100 for dyes and trims are prepared for the destination market. We ship to Shanghai or Shenzhen with the commercial invoice, packing list and certificate of origin, and hold the approved reference so reorders reproduce the same material, the same finish and the same hole position.
FAQ
What packing options are available?
Bulk packed, carded, or packed to your own size and design ratio with barcodes applied.
How long does sampling take?
A first sample takes 12 working days, and each revision about 3 days.
Can you match a reference sample?
Yes. Send the trim and we match material, finish and shade, then confirm on a pre-production sample before bulk.
How do you control colour on reorders?
The approved reference and the bulk standard are retained, and every reorder is checked against them before shipment.
Start your sequin programme
Send us a reference sample, a drawing or a spec sheet and we will come back with material options, a costing and a sampling timetable.
