Custom Braided Trim in Polyethylene (PE) with Tassel Finish for Uniform and Corporate Programmes

Custom Braided Trim — Polyethylene (PE) with Tassel Finish

We supply braided trim to garment factories and brands, built in Polyethylene (PE) with tassel finish for outerwear and jacket programmes. On a trim like this the specification that decides the outcome is wash shrinkage, because braid that shrinks puckers the seam, so that is agreed in writing before bulk — not discovered when the first carton is opened on the line. Programmes start at 2000 pieces per style per finish.

The failures here are predictable: colour drift between the approved sample and the bulk trim, or packing that arrives mixed and unusable on the line. We lock material, finish, dimension and tolerance before bulk, and prepare GSO conformity with Arabic labelling so the shipment clears instead of sitting at port while your selling season passes.

Specification

What buyers can customise

• Fringe Finish — available on Polyethylene (PE), quoted per position and per colour.
• Sewn Edge — available on Polyethylene (PE), quoted per position and per colour.
• Yarn Dyeing — available on Polyethylene (PE), quoted per position and per colour.
• Injection Moulding — available on Polyethylene (PE), quoted per position and per colour.
• Knitted Structure — available on Polyethylene (PE), quoted per position and per colour.
• Beaded Detail — available on Polyethylene (PE), quoted per position and per colour.
• Sequin Stitching — available on Polyethylene (PE), quoted per position and per colour.

How we produce it

1. Drawing or reference sample review, with size and finish confirmed
2. Material selection and a finish sample or strike-off
3. Prototype made to the agreed width
4. Fit and wash test on the actual garment fabric, then a pre-production sample
5. Bulk run with tassel finish applied under controlled settings
6. In-line inspection, final AQL 2.5 inspection and packing to your ratio

Where it is used

• Denim and workwear — hard-wearing finishes that survive industrial washing
• Outerwear and tailoring — matched to the shell fabric so it drapes with the garment
• Childrenswear and schoolwear — tested to the destination's safety standard
• Bridal and eveningwear — small runs with hand-finished detail
• Uniform and corporate programmes — repeatable spec held on file for reorders

Packing, testing and delivery

Trims are packed to the ratio you specify — by size, by colour or by garment set — with barcodes applied where the line needs them. Test reports for EN 71 part 3 for decorative components are prepared for the destination market. We ship to Jebel Ali with the commercial invoice, packing list and certificate of origin, and hold the approved reference so reorders reproduce the same material, the same finish and the same wash shrinkage.

FAQ

How do you control colour on reorders?

The approved reference and the bulk standard are retained, and every reorder is checked against them before shipment.

What is the minimum order?

Programmes start at 2000 pieces per style per finish. Mixed sizes are fine within one style.

What packing options are available?

Bulk packed, carded, or packed to your own size and design ratio with barcodes applied.

Can you do small runs across many designs?

Yes — many studio and boutique programmes run small quantities across a wide design set.

Start your braided trim programme

Tell us the quantity, the target price and the delivery window — we will tell you what is realistic before you commit.