Custom Sequin — Pewter with Fringe Finish
We supply sequin to garment factories and brands, built in Pewter with fringe finish for childrenswear and schoolwear. On a trim like this the specification that decides the outcome is colour fastness and resistance to cracking, so that is agreed in writing before bulk — not discovered when the first carton is opened on the line. Programmes start at 3000 pieces per style per finish.
The failures here are predictable: minimum order quantities far above what a growing brand can absorb, or inconsistent sizing between production runs. We lock material, finish, dimension and tolerance before bulk, and prepare CPSIA and California Prop 65 compliance so the shipment clears instead of sitting at port while your selling season passes.
Specification
| Product | Sequin |
|---|---|
| Size | 10 mm |
| Finish | metallic sequin |
| Base material | Pewter |
| Finish / process | Fringe Finish |
| Colour options | 24 Pantone-matched shades |
| Packing | bulk packed |
| MOQ | 3000 pieces per style per finish |
| Sampling | 14 working days, 3 days per revision |
| Bulk lead time | 25-50 days after approval |
| Compliance | CPSIA and California Prop 65 compliance; CPSIA lead and phthalate testing |
| Ship to | Los Angeles or New York (North America) |
What buyers can customise
- Epoxy Dome — available on Pewter, quoted per position and per colour.
- Beaded Detail — available on Pewter, quoted per position and per colour.
- Injection Moulding — available on Pewter, quoted per position and per colour.
- Heat Transfer Printing — available on Pewter, quoted per position and per colour.
- Rubber Coating — available on Pewter, quoted per position and per colour.
- Offset Printing — available on Pewter, quoted per position and per colour.
- Soft Enamel Fill — available on Pewter, quoted per position and per colour.
How we produce it
- Drawing or reference sample review, with size and finish confirmed
- Material selection and a finish sample or strike-off
- Prototype made to the agreed size
- Fit and wash test on the actual garment fabric, then a pre-production sample
- Bulk run with fringe finish applied under controlled settings
- In-line inspection, final AQL 2.5 inspection and packing to your ratio
Where it is used
- Denim and workwear — hard-wearing finishes that survive industrial washing
- Outerwear and tailoring — matched to the shell fabric so it drapes with the garment
- Childrenswear and schoolwear — tested to the destination's safety standard
- Bridal and eveningwear — small runs with hand-finished detail
- Uniform and corporate programmes — repeatable spec held on file for reorders
Packing, testing and delivery
Trims are packed to the ratio you specify — by size, by colour or by garment set — with barcodes applied where the line needs them. Test reports for CPSIA lead and phthalate testing are prepared for the destination market. We ship to Los Angeles or New York with the commercial invoice, packing list and certificate of origin, and hold the approved reference so reorders reproduce the same material, the same finish and the same colour fastness and resistance to cracking.
FAQ
How long does sampling take?
A first sample takes 14 working days, and each revision about 3 days.
What is the minimum order?
Programmes start at 3000 pieces per style per finish. Mixed sizes are fine within one style.
Can you do small runs across many designs?
Yes — many studio and boutique programmes run small quantities across a wide design set.
Can you match a reference sample?
Yes. Send the trim and we match material, finish and shade, then confirm on a pre-production sample before bulk.
Start your sequin programme
If you already have a supplier, send us the last problem you had with them. That is usually where we start.
