Custom Garment Accessory — Silicone with Sequin Stitching
We supply garment accessory to garment factories and brands, built in Silicone with sequin stitching for bridal and eveningwear studios. On a trim like this the specification that decides the outcome is packing format that keeps small parts from being mixed, so that is agreed in writing before bulk — not discovered when the first carton is opened on the line. Programmes start at 1000 pieces per style per finish.
The failures here are predictable: unclear responsibility when a defect shows up after washing, or a finish that tarnishes or rubs off after washing. We lock material, finish, dimension and tolerance before bulk, and prepare GSO conformity with Arabic labelling so the shipment clears instead of sitting at port while your selling season passes.
Specification
| Product | Garment Accessory |
|---|---|
| Packing | boxed sets |
| Type | garment accessory set |
| Base material | Silicone |
| Finish / process | Sequin Stitching |
| Colour options | 16 Pantone-matched shades |
| Packing | polybag per 100 |
| MOQ | 1000 pieces per style per finish |
| Sampling | 7 working days, 3 days per revision |
| Bulk lead time | 15-40 days after approval |
| Compliance | GSO conformity with Arabic labelling; EN 71 part 3 for decorative components |
| Ship to | Jebel Ali (the Middle East) |
What buyers can customise
- Pleating — available on Silicone, quoted per position and per colour.
- Debossing — available on Silicone, quoted per position and per colour.
- Gold Plating — available on Silicone, quoted per position and per colour.
- Brushed Finish — available on Silicone, quoted per position and per colour.
- Sewn Edge — available on Silicone, quoted per position and per colour.
- Epoxy Dome — available on Silicone, quoted per position and per colour.
- Stamping — available on Silicone, quoted per position and per colour.
How we produce it
- Drawing or reference sample review, with size and finish confirmed
- Material selection and a finish sample or strike-off
- Prototype made to the agreed packing
- Fit and wash test on the actual garment fabric, then a pre-production sample
- Bulk run with sequin stitching applied under controlled settings
- In-line inspection, final AQL 2.5 inspection and packing to your ratio
Where it is used
- Denim and workwear — hard-wearing finishes that survive industrial washing
- Outerwear and tailoring — matched to the shell fabric so it drapes with the garment
- Childrenswear and schoolwear — tested to the destination's safety standard
- Bridal and eveningwear — small runs with hand-finished detail
- Uniform and corporate programmes — repeatable spec held on file for reorders
Packing, testing and delivery
Trims are packed to the ratio you specify — by size, by colour or by garment set — with barcodes applied where the line needs them. Test reports for EN 71 part 3 for decorative components are prepared for the destination market. We ship to Jebel Ali with the commercial invoice, packing list and certificate of origin, and hold the approved reference so reorders reproduce the same material, the same finish and the same packing format that keeps small parts from being mixed.
FAQ
Which compliance documents do you provide?
We prepare EN 71 part 3 for decorative components and the supporting test reports for the destination market.
What packing options are available?
Bulk packed, carded, or packed to your own size and design ratio with barcodes applied.
How do you control colour on reorders?
The approved reference and the bulk standard are retained, and every reorder is checked against them before shipment.
Can you match a reference sample?
Yes. Send the trim and we match material, finish and shade, then confirm on a pre-production sample before bulk.
Start your garment accessory programme
Send us a reference sample, a drawing or a spec sheet and we will come back with material options, a costing and a sampling timetable.
