Custom Garment Accessory in Polycarbonate with Pantone Colour Matching for Bridal and Eveningwear Studios

Custom Garment Accessory — Polycarbonate with Pantone Colour Matching

We supply garment accessory to garment factories and brands, built in Polycarbonate with pantone colour matching for e-commerce and small-batch brands. On a trim like this the specification that decides the outcome is finish consistency across a mixed set, so that is agreed in writing before bulk — not discovered when the first carton is opened on the line. Programmes start at 5000 pieces per style per finish.

The failures here are predictable: inconsistent sizing between production runs, or shade variation within one carton. We lock material, finish, dimension and tolerance before bulk, and prepare CPSIA and California Prop 65 compliance so the shipment clears instead of sitting at port while your selling season passes.

Specification

What buyers can customise

• Epoxy Dome — available on Polycarbonate, quoted per position and per colour.
• Heat Transfer Printing — available on Polycarbonate, quoted per position and per colour.
• UV Printing — available on Polycarbonate, quoted per position and per colour.
• Gold Plating — available on Polycarbonate, quoted per position and per colour.
• Yarn Dyeing — available on Polycarbonate, quoted per position and per colour.
• Heat-Cut Edge — available on Polycarbonate, quoted per position and per colour.
• Offset Printing — available on Polycarbonate, quoted per position and per colour.

How we produce it

1. Drawing or reference sample review, with size and finish confirmed
2. Material selection and a finish sample or strike-off
3. Prototype made to the agreed packing
4. Fit and wash test on the actual garment fabric, then a pre-production sample
5. Bulk run with pantone colour matching applied under controlled settings
6. In-line inspection, final AQL 2.5 inspection and packing to your ratio

Where it is used

• Denim and workwear — hard-wearing finishes that survive industrial washing
• Outerwear and tailoring — matched to the shell fabric so it drapes with the garment
• Childrenswear and schoolwear — tested to the destination's safety standard
• Bridal and eveningwear — small runs with hand-finished detail
• Uniform and corporate programmes — repeatable spec held on file for reorders

Packing, testing and delivery

Trims are packed to the ratio you specify — by size, by colour or by garment set — with barcodes applied where the line needs them. Test reports for colour fastness to washing, rubbing and light are prepared for the destination market. We ship to Los Angeles or New York with the commercial invoice, packing list and certificate of origin, and hold the approved reference so reorders reproduce the same material, the same finish and the same finish consistency across a mixed set.

FAQ

How do you control colour on reorders?

The approved reference and the bulk standard are retained, and every reorder is checked against them before shipment.

What packing options are available?

Bulk packed, carded, or packed to your own size and design ratio with barcodes applied.

Do you ship to our forwarder?

Yes. We deliver to your nominated forwarder or quote landed cost under the agreed Incoterm.

What is the minimum order?

Programmes start at 5000 pieces per style per finish. Mixed sizes are fine within one style.

Start your garment accessory programme

If you already have a supplier, send us the last problem you had with them. That is usually where we start.